Skip to main content

Rear View Safety launch sensor for obstacles behind vehicles

Rear View Safety will launch its RVS-112-W Waterproof Backup Sensor Reversing System (RVS-112-W) in early 2018. The system is designed with the intention of warning drivers of potential obstacles behind their vehicle up to 8ft away.
December 22, 2017 Read time: 1 min
Rear View Safety will launch its RVS-112-W Waterproof Backup Sensor Reversing System (RVS-112-W) in early 2018. The system is designed with the intention of warning drivers of potential obstacles behind their vehicle up to 8ft away.

 
RVS-112-W is an upgraded version of the RVS-112 Backup Sensor Revering System and enables the operator to install the control module outside the vehicle to provide user flexibility on installation location.
 
The solution uses ultrasonic echo location sonar technology which is activated when the driver engages in reverse gear. A 4-zone audio pulse intensity increases to alert the driver and the audio frequency changes as the vehicle moves closer to an obstacle. These sensors automatically ignore stationary, permanent objects, such as truck steps, up to 30cm away.

Related Content

  • Triplesign shines with low-power solution
    July 15, 2024
    Product is particularly suited to addressing growing issue of flooded road sections
  • Asecap debates the future of tolling
    August 23, 2016
    Colin Sowman reports form Asecap’s Study & Information Days event in Madrid. At Asecap’s (the Association of European Toll Road Operators) recent Study and Information Days event there was no doubt about the subject at the top of the agenda: the European Union Directive 23/2014/EU. This will introduce fundamental changes to the concession model under which Asecap members operate more than 50,000km of tolled highways and, in response, it has compiled a report entitled Proposal for a Sustainable Concession Mo
  • Moxa provides clear vision for Caldecott Tunnel’s Fourth Bore
    September 15, 2014
    Caldecott Tunnel’s new Fourth Bore is utilising a bespoke high-capacity monitoring and communications network from Moxa. The Caldecott Tunnel connects Contra Costa and Alameda counties in Northern California and traditionally it has suffered severe congestion - especially during peak hours. Opened in 1937 as a twin-bore arrangement, by 1964 the increase in traffic volumes led to a third bore being added. Shortly after the third bore was opened a tidal flow was introduced with the centre bore alternating in
  • Transportation applications move to machine vision’s mainstream
    June 11, 2015
    The adaptation of machine vision to transport applications continues apace. That the machine vision industry is taking traffic installations seriously is evident by the amount of hardware and software products tailor-made for ITS applications that are now available on the market. A good example comes from US-based Gridsmart Technologies which has developed a single wire fisheye camera that provides a horizon to horizon view for use at intersections. Not only does the single camera replace four or more in a