Skip to main content

Michigan pilots pedestrian safety signs

New crosswalk signs have been installed in installed several southwest Michigan cities as part of a joint research project by the Michigan Department of Transportation (MDOT) and Western Michigan University (WMU). The project involves testing the crosswalk signs as potential low-cost safety measures to increase pedestrian safety and motorist awareness. The signs are designed to be permanently affixed to the road but can be removed for the winter when snow removal is necessary. The signs will be removed i
August 21, 2015 Read time: 2 mins
New crosswalk signs have been installed in installed several southwest Michigan cities as part of a joint research project by the 1688 Michigan Department of Transportation (MDOT) and Western Michigan University (WMU). The project involves testing the crosswalk signs as potential low-cost safety measures to increase pedestrian safety and motorist awareness.

The signs are designed to be permanently affixed to the road but can be removed for the winter when snow removal is necessary. The signs will be removed in mid-November this year and the research results are expected to be published early next year.

The signs have been installed at 10 crosswalks in three roundabouts and six intersections in five MDOT Southwest Region communities. Installation sites were chosen primarily to get a variety of intersection configurations such as full intersections, roundabouts, mid-block crosswalks, etc. Dr Ron Van Houten, the traffic safety research expert leading the WMU study said several factors were considered, such as lane width, the messages on signs and the types of signs used.

Van Houten said the study already is showing signs of increased pedestrian safety. "People are looking for pedestrians with the signs there," he said. "Our data shows drivers slow a bit, their heads are turning, and that is a good thing in an urban environment."

Carissa McQuiston, MDOT project manager and non-motorised safety engineer, said the study is designed to increase pedestrian crossing awareness for pedestrians and drivers. Signs have been placed at crosswalks in the road at the edge lines, centre lines and lane lines.

"We have very good preliminary data that supports this installation as a way to inform drivers of pedestrian presence and highlight their crossing activity," McQuiston said. "With these installations, the researchers are collecting data about pedestrian safety, drivers yielding, and the durability of the signs."

Van Houten said while the signs are designed to withstand some abuse from traffic, there has to be a balance of durability and cost. "Ideally, they will last a long time," he said. "It will cost the department more money if they have to replace them frequently."

For more information on companies in this article

Related Content

  • LED road studs aid level crossing safety
    June 16, 2014
    Active LED solar road studs supplied by Rennicks UK have been granted a Certificate of Acceptance by the authority responsible for the UK’s railways, paving the way for the studs to be installed at level crossings around the country. Rennicks say that the road studs are an intuitive signal to pedestrians, cyclists and drivers in the approach to and crossing the track. The studs use dual LEDs with an internal prismatic system for high performance and solar/battery technology for environmental sustaina
  • A new way to manage parking demand
    July 21, 2021
    Parking permit changes at one US campus could provide a model for encouraging active travel options post-Covid – and for transit ticketing adjustments as commuting patterns change
  • Camera technology a flexible and cost-effective option
    June 7, 2012
    Perceptions of machine vision being an expensive solution are being challenged by developments in both core technologies and ancillaries. Here, Jason Barnes and David Crawford look at the latest developments in the sector. A notable aspect of machine vision is the flexibility it offers in terms of how and how much data is passed around a network. With smart cameras, processing capabilities at the front end mean that only that which is valid need be communicated back to a central processor of any descripti
  • SCANaCAR and VideoBadge counter parking’s prickly problems.
    June 4, 2014
    Colin Sowman discovers how the latest systems can boost productivity and reduce conflict in parking enforcement. Parking enforcement is something of a ‘Cinderella’ service for local authorities: while necessary to keep the roads open and the traffic flowing, it is an expensive operation and can be loss-making. It is also labour intensive and parking enforcement officers are routinely verbally abused and sometimes physically attacked. Some authorities are now looking to automate parking enforcement in orde