Latest pedestrian safety technology from McCain

Designed to boost driver awareness of pedestrians, McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals. An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting appr
March 19, 2014 Read time: 2 mins
Designed to boost driver awareness of pedestrians, 772 McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals.

An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting approaching vehicles that pedestrians are present.

According to McCain, RRFBs are rapidly gaining popularity as an inexpensive and effective alternative for improving compliance and facilitating pedestrian crossing manoeuvres; generally delivering driver compliance of around 80 per cent.

Following an extensive study confirming the effectiveness, the 831 Federal Highway Administration issued an interim approval of the RRFB in the Manual of Uniform Traffic Control Devices (MUTCD). According to the approval, the RRFB offers “significant potential safety and cost benefits, because it achieves very high rates of compliance at a very low relative cost in comparison to other more restrictive devices that provide comparable results, such as full midblock signalisation.”
Urban Traffic Control

Related Content

  • European trends in environmental monitoring and enforcement
    February 2, 2012
    David Crawford surveys European trends in environmental monitoring and enforcement
    Read More
  • Tapco launches pedestrian crossing illuminator
    February 17, 2020
    Tapco (Traffic and Parking Control Co) has launched the SafeWalk Crosswalk Illuminator in a bid to increase nighttime visibility at pedestrian crossings.
    Read More
  • Transportation applications move to machine vision’s mainstream
    June 11, 2015
    The adaptation of machine vision to transport applications continues apace. That the machine vision industry is taking traffic installations seriously is evident by the amount of hardware and software products tailor-made for ITS applications that are now available on the market. A good example comes from US-based Gridsmart Technologies which has developed a single wire fisheye camera that provides a horizon to horizon view for use at intersections. Not only does the single camera replace four or more in a
    Read More
  • New research: to illuminate or not to illuminate
    February 5, 2013
    Researchers from the US Lighting Research Center (LRC) and Penn State University have recently published a paper entitled “To illuminate or not to illuminate: Roadway lighting as it affects traffic safety at intersections”. Published in the journal Accident Analysis and Prevention the paper describes a parallel approach to lighting safety analysis. Tackling the tricky questions of when and where to install roadway illumination, while at the same reducing municipal costs, is a challenge for transportation a
    Read More

Highlighted Content