Skip to main content

Latest pedestrian safety technology from McCain

Designed to boost driver awareness of pedestrians, McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals. An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting appr
March 19, 2014 Read time: 2 mins
Designed to boost driver awareness of pedestrians, 772 McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals.

An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting approaching vehicles that pedestrians are present.

According to McCain, RRFBs are rapidly gaining popularity as an inexpensive and effective alternative for improving compliance and facilitating pedestrian crossing manoeuvres; generally delivering driver compliance of around 80 per cent.

Following an extensive study confirming the effectiveness, the 831 Federal Highway Administration issued an interim approval of the RRFB in the Manual of Uniform Traffic Control Devices (MUTCD). According to the approval, the RRFB offers “significant potential safety and cost benefits, because it achieves very high rates of compliance at a very low relative cost in comparison to other more restrictive devices that provide comparable results, such as full midblock signalisation.”

For more information on companies in this article

Related Content

  • Australia’s largest intelligent vehicle trial to be held in Queensland
    November 25, 2016
    Queensland is preparing for driverless and connected vehicles with ambitious plans underway for a four-year on-road testing trial in Australia as part of the Cooperative and Automated Vehicle Initiative (CAVI) to ensure the State is ready for the future. The government has chosen the urban area of Ipswich as the site of the large-scale test-bed to trial vehicles and infrastructure that can talk to one another as well as to test cooperative and highly-automated vehicles. Around 500 motorists will be recru
  • Transport Scotland opts for Vysionics average speed enforcement
    April 23, 2014
    Traffic control specialist Vysionics ITS has won a deal to deliver Europe’s longest average speed enforcement system. This will be installed on a 220km stretch of the A9 in Scotland. The installation will be the first time average speed cameras will have been used on such a long stretch of road on a permanent basis, rather than for short term use during road repairs. The current road configuration is a mixture of single and dual carriageway which carries a high proportion of HGV traffic. Part of the lon
  • Georgia DoT showcases its connectivity
    March 3, 2020
    Georgia DoT’s regional connected vehicle programme could be a model for the rest of the US. Adam Hill speaks to two men involved in making it a reality – and takes a look at the state’s first-ever Tech Showcase
  • Report highlights community impact of new mobility options
    March 29, 2018
    Local authorities and communities must understand the impacts of the new mobility options and regulate to get the transport systems they want, according to a new report. Colin Sowman takes a look. Outside of the big cities plagued with congestion, the existing transportation system(s) often cope adequately, and the ongoing workload (maintenance, safety…) is more than enough to keep local transport authorities busy. Is it, therefore, a good use of public service employees’ time to keep abreast of the raft