Kistler installs WiM system on Czech highway

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from Kistler to help prevent road damage from trucks. Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country. KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph
September 23, 2019 Read time: 2 mins

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from 657 Kistler to help prevent road damage from trucks.

Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country.

KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph of the vehicle to the authorities who can then send a standard letter to fine the owner, the company adds.

It was installed in collaboration with system integrator Spel on a new section of the highway. As part of an accuracy test, the team weighed vehicles from categories B (a 994 Volkswagen transporter), C (a six-axle truck) and D (a bus) on stationary scales and then in motion via the WiM system. Kistler passed CMI’s maximum error margin of 5% per vehicle and 11% per axle.

Tomas Pospisek, global market development manager for road & traffic EMEA at Kistler, says: “This error margin is factored in by the system to make sure no vehicle is fined incorrectly.”

The WiM system was certified by the International Organisation of Legal Metrology (OIML) and the Swiss Federal Institute for Metrology.

“There is currently no pan-European certificate for WiM systems. However, having already obtained a more general measuring certificate, the OIML helped us to get approved in the Czech Republic,” Pospisek continues. “This meant we were able to skip some tests and save time.”

Looking ahead, Kistler is hoping to open 15 WiM stations on Czech highways.

Urban Traffic Control

Related Content

  • Kistler to showcase WIM solutions at Intertraffic in Amsterdam
    February 13, 2018
    Kistler Group (Kistler) will showcase its KiTraffic Weigh-in-Motion (WIM) solutions at this year’s Intertraffic in Amsterdam from the 20-23 March 2018. The innovations are intended to support road owners and authorities in road and traffic monitoring, weight enforcement and weight-based tolling. The KiTraffic Plus, a WIM solution for automated road monitoring, comes with Lineas quartz sensors and is said to measure vehicle loads at different speeds on a range of lanes. It uses two to eight sensors per l
    Read More
  • Rekor and Kistler combine technologies for WiM projects
    January 30, 2024
    Kistler WiM sensors and Rekor camera systems are synchronised to detect overweight trucks
    Read More
  • Kistler’s KiTraffic Digital Weigh in Motion (WiM) system makes debut
    March 29, 2022
    Making its debut at Intertraffic 2022, the KiTraffic Digital Weigh in Motion (WiM) system from Kistler has been awarded the OIML R134 certificate by the widely-recognised Swiss Federal Institute of Metrology (Metas).
    Read More
  • Traffic Data Systems receives Swiss certification for WIM system
    September 19, 2017
    Traffic Data Systems’ WIM-DSP 32 low-speed and high-speed weigh-in-motion (WIM) system has been awarded an OIML-R134-1 certificate by the Swiss Federal Institute of Metrology, proving accuracy levels of ±5% (initial verification) and ±10% (in-service inspection) have been achieved. The Swiss institute’s supervised certification process required more than 500 test runs with different vehicles, speeds and loads.
    Read More

Highlighted Content