Kistler installs WiM system on Czech highway

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from Kistler to help prevent road damage from trucks. Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country. KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph
September 23, 2019 Read time: 2 mins

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from 657 Kistler to help prevent road damage from trucks.

Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country.

KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph of the vehicle to the authorities who can then send a standard letter to fine the owner, the company adds.

It was installed in collaboration with system integrator Spel on a new section of the highway. As part of an accuracy test, the team weighed vehicles from categories B (a 994 Volkswagen transporter), C (a six-axle truck) and D (a bus) on stationary scales and then in motion via the WiM system. Kistler passed CMI’s maximum error margin of 5% per vehicle and 11% per axle.

Tomas Pospisek, global market development manager for road & traffic EMEA at Kistler, says: “This error margin is factored in by the system to make sure no vehicle is fined incorrectly.”

The WiM system was certified by the International Organisation of Legal Metrology (OIML) and the Swiss Federal Institute for Metrology.

“There is currently no pan-European certificate for WiM systems. However, having already obtained a more general measuring certificate, the OIML helped us to get approved in the Czech Republic,” Pospisek continues. “This meant we were able to skip some tests and save time.”

Looking ahead, Kistler is hoping to open 15 WiM stations on Czech highways.

Urban Traffic Control

For more information on companies in this article

Related Content

  • IRD WIM and tolling technology to be deployed in Mongolia
    March 2, 2012
    International Road Dynamics (IRD) has been awarded a new contract in Mongolia by MCS Electronics.
    Read More
  • WiM market to reach $1.8bn by 2027: report
    February 2, 2023
    Research and Markets predicts CAGR of 10% in sector over the next five years
    Read More
  • Advanced ITS truck screening aids border control
    March 14, 2012
    State-of-the-art ITS technologies are being deployed for tracking of commercial vehicles at the US-Mexico border in Arizona, reports Pete Goldin. The border between the US and Mexico may be the epitome of America's wild west, but this remote desert frontier is being tamed by the Arizona Department of Transportation (ADOT) with a state-of-the-art ITS system. A comprehensive port-of-entry (POE) screening system is being deployed at the Mariposa Port of Entry – one of the busiest land ports in the nation – at
    Read More
  • Advanced ITS truck screening aids border control
    March 14, 2012
    State-of-the-art ITS technologies are being deployed for tracking of commercial vehicles at the US-Mexico border in Arizona, reports Pete Goldin. The border between the US and Mexico may be the epitome of America's wild west, but this remote desert frontier is being tamed by the Arizona Department of Transportation (ADOT) with a state-of-the-art ITS system. A comprehensive port-of-entry (POE) screening system is being deployed at the Mariposa Port of Entry – one of the busiest land ports in the nation – at
    Read More

Highlighted Content