Kistler installs WiM system on Czech highway

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from Kistler to help prevent road damage from trucks. Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country. KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph
September 23, 2019 Read time: 2 mins

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from 657 Kistler to help prevent road damage from trucks.

Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country.

KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph of the vehicle to the authorities who can then send a standard letter to fine the owner, the company adds.

It was installed in collaboration with system integrator Spel on a new section of the highway. As part of an accuracy test, the team weighed vehicles from categories B (a 994 Volkswagen transporter), C (a six-axle truck) and D (a bus) on stationary scales and then in motion via the WiM system. Kistler passed CMI’s maximum error margin of 5% per vehicle and 11% per axle.

Tomas Pospisek, global market development manager for road & traffic EMEA at Kistler, says: “This error margin is factored in by the system to make sure no vehicle is fined incorrectly.”

The WiM system was certified by the International Organisation of Legal Metrology (OIML) and the Swiss Federal Institute for Metrology.

“There is currently no pan-European certificate for WiM systems. However, having already obtained a more general measuring certificate, the OIML helped us to get approved in the Czech Republic,” Pospisek continues. “This meant we were able to skip some tests and save time.”

Looking ahead, Kistler is hoping to open 15 WiM stations on Czech highways.

UTC

Related Content

  • April 16, 2015
    WIM system now OIML certified
    Kistler’s weigh in motion (WIM) system, comprising Lineas quartz WIM sensors and the Kistler WIM data logger, has been awarded OIML R-134 certification for low to medium speed vehicle weighing from 3 to 65 km/h. As OIML R-134 is the international metrology standard for legal weighing applications, Kistler says the certificate paves the way for the use of its WIM systems in applications such as weight-based toll collection and automatic weight enforcement. The system also enables road concessionaries a
    Read More
  • September 16, 2015
    Kistler Lineas strip sensors receive OIML certification
    Kistler has announced that its Weigh-In-Motion (WIM) system consisting of Lineas quartz WIM sensors and the Kistler WIM Data Logger has been OIML R-134 certified. Kistler said its WIM system precisely measure axle loads and vehicle weights from low to high speed. It is now, with the OIML certificate (International Organisation of Legal Meteorology) also certified for legal applications from low to medium speed (3-65 kph) with accuracy class 5 and class 10. This enables the automatic collection of weig
    Read More
  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • June 5, 2014
    New technology is changing the Weigh In Motion landscape
    Exciting new weigh in motion solutions were showcased at Intertraffic. Guy Woodford reports For many years weigh-in-motion (WIM) has been used solely as a filtering mechanism to detect potentially overloaded vehicles, but introductions at Intertraffic may see that change. At the Intertraffic exhibition to unveil its Apollo range of British-manufactured axle weighbridges was Applied Traffic. The in-motion and static axle-by-axle weighing system offers slow speed and portable weighing solutions suitable for
    Read More

Highlighted Content