Kistler installs WiM system on Czech highway

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from Kistler to help prevent road damage from trucks. Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country. KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph
September 23, 2019 Read time: 2 mins

The Czech Metrology Institute (CMI) has approved a Weigh in Motion (WiM) system from 657 Kistler to help prevent road damage from trucks.

Kistler, a measurement technology company, says its KiTraffic system is being used to track and fine overloaded trucks on the D7 Highway from Prague to the north-west of the country.

KiTraffic is comprised of Lineas brand quartz sensors integrated into the road, cameras, hardware and software. If a truck exceeds the weight limit, the system sends the weight and a photograph of the vehicle to the authorities who can then send a standard letter to fine the owner, the company adds.

It was installed in collaboration with system integrator Spel on a new section of the highway. As part of an accuracy test, the team weighed vehicles from categories B (a 994 Volkswagen transporter), C (a six-axle truck) and D (a bus) on stationary scales and then in motion via the WiM system. Kistler passed CMI’s maximum error margin of 5% per vehicle and 11% per axle.

Tomas Pospisek, global market development manager for road & traffic EMEA at Kistler, says: “This error margin is factored in by the system to make sure no vehicle is fined incorrectly.”

The WiM system was certified by the International Organisation of Legal Metrology (OIML) and the Swiss Federal Institute for Metrology.

“There is currently no pan-European certificate for WiM systems. However, having already obtained a more general measuring certificate, the OIML helped us to get approved in the Czech Republic,” Pospisek continues. “This meant we were able to skip some tests and save time.”

Looking ahead, Kistler is hoping to open 15 WiM stations on Czech highways.

Urban Traffic Control

For more information on companies in this article

Related Content

  • CAMEA WIM is type approved and turnkey for weigh-in-motion
    October 23, 2012
    CAMEA WIM, developed and manufactured by CAMEA image and signal processing, is a turnkey solution for weigh-in-motion applications, from traffic reports to enforcement. According to CAMEA, the high speed system allows vehicles thought to be overloaded to be pre-selected and directed to a precise weigh station without impact on traffic flow. The CAMEA WIM – type approved for weight enforcement in the Czech Republic – also provides rich sets of traffic data in database format for export in standard formats.
    Read More
  • Car emissions campaigners turn sights on Renault
    November 27, 2015
    Renault's flagship Espace minivan released toxic diesel emissions 25 times over legal limits in a Swiss study, despite complying with EU tests carried out at unrealistically low engine temperatures, a German environmental group said this week. According to Reuters, the tests commissioned by the DUH group, which have not been independently verified, follow Volkswagen's admission that it used illegal ‘defeat devices’ to cheat diesel emission regulations. In a statement, Renault said it contested the fin
    Read More
  • Intercomp celebrates milestones at Intertraffic 2018
    March 20, 2018
    Multiple milestones for Intercomp and its products will be celebrated at Intertraffic. The company’s in-ground strain gauge strip sensors, used in low and high-speed WIM (HSWIM), and its LSWIM axle scale have each successfully passed OIML initial verification testing, with the OIML R134 certificates in process. These successful tests coincide with the 40 year anniversary of the establishment of the Intercomp. Intercomp’s strain gauge strip sensors are grouted into 3 inch (75mm) channels cut into the ro
    Read More
  • Intercomp celebrates milestones at Intertraffic 2018
    March 20, 2018
    Multiple milestones for Intercomp and its products will be celebrated at Intertraffic. The company’s in-ground strain gauge strip sensors, used in low and high-speed WIM (HSWIM), and its LSWIM axle scale have each successfully passed OIML initial verification testing, with the OIML R134 certificates in process. These successful tests coincide with the 40 year anniversary of the establishment of the Intercomp. Intercomp’s strain gauge strip sensors are grouted into 3 inch (75mm) channels cut into the ro
    Read More

Highlighted Content