Skip to main content

Illuminated road studs aid roundabout safety

In a bid to improve safety at the Sheriffhall roundabout near Edinburgh, Scotland, Clearview Traffic has been working with BEAR Scotland on an innovative accident reduction project at the complex six-arm gyratory roundabout which is used by over 42,000 vehicles per day. The project, which Clearview says is the first of its kind in the UK, uses the company’s IRS2 intelligent hardwired road stud to increase driver awareness and improve lane discipline on and off the roundabout. Improvements and efficien
July 15, 2014 Read time: 2 mins
In a bid to improve safety at the Sheriffhall roundabout near Edinburgh, Scotland, 557 Clearview Traffic has been working with BEAR Scotland on an innovative accident reduction project at the complex six-arm gyratory roundabout which is used by over 42,000 vehicles per day.

The project, which Clearview says is the first of its kind in the UK, uses the company’s IRS2 intelligent hardwired road stud to increase driver awareness and improve lane discipline on and off the roundabout.

Improvements and efficiencies made to the traffic signal-controlled roundabout in recent years have dramatically increased its capacity. BEAR Scotland was keen to ensure safety measures were improved in line with the increased use of the roundabout. Investigations found that inadvertent lane drifting was a significant contributory factor to negotiating it safely.

To address this issue, whilst at the same time causing minimal impact on the existing road markings and supporting infrastructure of the roundabout, BEAR Scotland and Clearview Traffic devised a unique road stud layout scheme that would guide the A720 traffic from either direction safely around and off the roundabout.

With the new system in place, as soon as the traffic signal on the entrance to the roundabout turns green, studs embedded in the road surface immediately illuminate and guide drivers onto the appropriate lanes of the roundabout. As the traffic signal turns red, all the studs on that section switch off and the studs on the next section illuminate as the corresponding traffic signal turns green. In this way, drivers now get an illuminated green phase to guide them all the way around and off the roundabout, with clear visual definition of the lanes to heighten lane discipline and reduce preventable collisions.

For more information on companies in this article

Related Content

  • London’s strategy to tackle air quality problems
    October 21, 2014
    Colin Sowman talks to Matthew Pencharz, the man charged with charting London’s path between catering for traveller needs, conserving ancient buildings and conforming to modern air quality standards.
  • ITS adaptions enhance cycle safety in Dublin
    December 3, 2013
    Enabled and enforced by innovative use of ITS, Dublin’s new off-road cycle route is proving a hit with commuters, leisure cyclists and walkers alike as Brendan O’Brien explains. Dublin City Council’s vision is to create a city where people of all ages and abilities have the confidence, incentive and facilities to cycle. On-road cycle lanes had already been incorporated into the Quality Bus Corridors design and there is a mix of on- and off-road cycle routes. However, in 2010 the Council began work on a new
  • It’s official: 20 (or 30) really is plenty
    April 30, 2025
    A study has looked at what 20mph (30 km/h) speed limits mean in terms of road safety – and the answers are encouraging. Alan Dron speaks to transport researcher Aud Tennøy…
  • Hikvision boosts road safety with smart detection of traffic violations
    December 20, 2022
    Traffic violations cause negative outcomes, from accident and injury to road blockages that cause long and frustrating delays for other road users. Hikvision explains how its detection solution mitigates these outcomes…