Skip to main content

Highways England's Eastern Regional Control Centre upgraded

Audio-visual systems integrator Electrosonic has recently installed a dynamic display system (DDS) at Highways England’s Eastern Regional Control Centre in South Mimms. Comprising of LED illuminated cubes, the new DDS technology provides a solution that is virtually maintenance free, energy efficient and suitable for 24/7 usage. Electrosonic installed an 8x3 array of Mitsubishi Electric 67PE78, 67-inch SXGA+ LED illuminated cubes, which are brighter, of higher resolution and use less power than their pre
June 1, 2016 Read time: 2 mins
Audio-visual systems integrator 6683 Electrosonic has recently installed a dynamic display system (DDS) at 8101 Highways England’s Eastern Regional Control Centre in South Mimms. Comprising of LED illuminated cubes, the new DDS technology provides a solution that is virtually maintenance free, energy efficient and suitable for 24/7 usage.

Electrosonic installed an 8x3 array of 7874 Mitsubishi Electric 67PE78, 67-inch SXGA+ LED illuminated cubes, which are brighter, of higher resolution and use less power than their predecessor. Additionally, they do not require any consumables such as projector lamps that would need regular replacement.

The cubes have a 4:3 aspect ratio that matches the camera images exactly, while their automatic colour balancing feature ensures that all cubes in the array give a uniform performance. They are energy efficient, low maintenance and can support 24/7 usage. The cubes also benefit from an extremely narrow 1-mm bezel, which presents a virtually seamless image when magnified across a 2x2 cube array.

The DDS can show any combination of video or images across the array, determined by any one of the 20 operator positions. The vast majority of images are derived from Highways England’s network of 870 cameras located around the regions roads. In addition, images from other regions, roadwork cameras, Transport for London and broadcast images can also be selected.

The display receives its inputs from an Eyevis Netpix NPX-4800 video wall processor, chosen for its flexibility and capability of dealing with many source types. It also met Highways England’s requirement that the processor should be able to process directly H264 compressed CCTV images delivered over IP, according to ONVIF (Open Network Video Interface Forum) format.

For more information on companies in this article

Related Content

  • Samsung IP camera line grows
    April 25, 2012
    Samsung Techwin America, a leading supplier of advanced video surveillance solutions, has introduced an outdoor 3-megapixel network video surveillance camera with an IR range of 30 metres in total darkness. The SNO-7080R, complete with a 2.8X varifocal motorised zoom lens, can capture 16:9 full HD images at 1920 x 1080p with wide dynamic range (WDR) and features a dual H.264 and MPEG codec. It is IP66 environmentally rated for severe or varying weather conditions and can be powered via PoE and 24V The SNO-7
  • Developing ‘next generation’ traffic control centre technology
    July 4, 2012
    The Rijkswaterstaat and Highways Agency have joined forces to investigate what the market can do to realise an idealistic vision for traffic control centre technology. Jon Masters reports One particular seminar session of the Intertraffic show in Amsterdam in March was notably over subscribed. So heavy was the press to attend that your author, making his way over late from another appointment, could not get in and found himself craning over other heads locked outside to overhear what was being said. The
  • Video encoder integrates analogue cameras into VMS
    March 18, 2014
    Vicon Industries has introduced its VN-901T single-channel video encoder, which converts NTSC or PAL video from any analogue camera into an ONVIF-compliant video stream that can be integrated into most IP video management systems, including ViconNet VMS. The device transmits H.264 high-profile, MPEG-4 and M-JPEG video compression formats with dual streaming. All camera features are supported through the encoder, including PTZ. The device may be powered by either PoE or 12V DC/24V AC. Two alarm inputs, on
  • Eyevis LED Cubes
    February 1, 2012
    Eyevis has released details of a new optical LED projection engine for the EC Cube Series that uses a new light concept (applying one-panel DLP Technology without colour wheel and without lamp) using RGB LED illumination. According to the company, the LED cube provides an extensively longer lifetime of the light source (approximately 55,000h) as well as enhanced optical performance, such as a high-contrast and high-colour gamut RGB illumination system for highest colour fidelity during operation.