Skip to main content

Counting cyclists in Nottinghamshire aids strategic plan delivery

As part of Nottinghamshire County Council’s Strategic Plan 2014-2018, which aims to increase the level of cycling in the county, UK company Traffic Technology has supplied its Zelt cycle detector to the council. The proportion of people walking or cycling for short journeys is identified as an indicator to measure how the Council is delivering its Strategic Plan, making it important for it to measure levels of cycling. According to the Council, permanent cycle counters provide more robust data over th
October 21, 2016 Read time: 2 mins
As part of Nottinghamshire County Council’s Strategic Plan 2014-2018, which aims to increase the level of cycling in the county, UK company 561 Traffic Technology has supplied its Zelt cycle detector to the council.

The proportion of people walking or cycling for short journeys is identified as an indicator to measure how the Council is delivering its Strategic Plan, making it important for it to measure levels of cycling.

According to the Council, permanent cycle counters provide more robust data over the long term and allow it to easily identify seasonal, daily and short period patterns in cycle numbers. It has phased out its manual cycle counts, which were time consuming and costly, and replaced them with the permanent Zelt counter, which has been installed at around 50 sites in the county.

The Zelt counter uses a specially-shaped inductive loop installed in the traffic or cycle lane at a depth of 2-4cm to detect the unique signature of each cycle wheel as it passes over the loop within a 1.5m corridor.  All other electromagnetic signals are ignored.

For more information on companies in this article

Related Content

  • Plug and play approach unifies workzone ITS
    July 18, 2012
    Caltrans District 7 is finalising a ConOps document which will detail a plug-and-play to work zone ITS operation. The organisation's Allen Z. Chen elaborates. Before August is out, on current planning, the California Department of Transportation (Caltrans) District 7 (which covers Los Angeles and Ventura Counties, with a combined population of close to 11 million people) intends to have finalised a Concept of Operations (ConOps) document dealing with Work Zone Transportation Management Systems (WZTMS). The
  • IRD polishes WiM’s green credentials
    December 21, 2020
    A project in Canada is proving that Weigh in Motion can have a positive environmental impact, by helping to reduce emissions. Adam Hill looks at International Road Dynamics’ numbers
  • Roadside monitoring used to target non-compliant trucks
    March 9, 2016
    The UK’s DVSA is utilising existing technology to identify non-compliant commercial vehicles and target repeat offenders while avoiding law-abiding companies. Enforcing the compliance of commercial vehicles (goods vehicles over 3.5 tonnes and vehicles with eight or more passenger seats) on the UK’s roads is the responsibility of the DVSA (the Driver and Vehicle Standards Agency). The Department for Transport created the executive agency about 18 months ago by merging the Driving Standards Agency (DSA) and t
  • Dynamic lane closures cuts time, cost and congestion on Motorway roadworks
    March 17, 2014
    A combination of technologies is leading to major congestion and cost reductions during roadworks on the UK’s motorway network. Innovative construction programme scheduling technology and the deployment of moveable barriers has achieved substantial savings of money and time on UK motorway roadworks managed by the Highways Agency (HA). This combination has set the scene for a new generation of road usage analysis tools. The HA’s objective was to reduce the congestion caused by lane closures during roa