City of Liverpool relies on thermal imaging to boost cycling

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer. The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.
April 22, 2016 Read time: 2 mins

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed 6778 Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer.

The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.

The city developed a dedicated cycle scheme for Leeds Street, which links directly with The Strand, where the historic Waterfront and Three Graces are located. The scheme is funded by the Regional Growth Fund via the UK Department for Business, Innovation and Skills and includes road resurfacing, innovative traffic signals, LED street lighting, public realm regeneration, cycle and pedestrian facilities and capacity improvements.

On completion, the scheme should improve transport links by removing pinch points at junctions. It will also increase the capacity of the Leeds Street route, which links North Liverpool with the city’s commercial district.

Traffic signals at the two junctions display a green bike before the full green for other traffic, allowing cyclists a five second head start on other vehicles. The signal expires when the full green light comes on. The signals are powered by Flir ThermiCam sensors, which detect cyclists and distinguish them from other vehicles, meaning the advance lights are not used when there are no cyclists, avoiding delays to other road users.

ThermiCam uses the thermal energy emitted from vehicles and cyclists and is able sensor to detect vehicles and cycles in both daylight and darkness, over a long range and in difficult weather conditions. In Liverpool, the sensor transmits its cycle detection information to the traffic light controller to provide a more dynamic control of traffic lights, resulting in reduced vehicle idling time, improved traffic flow and improved safety and mobility for cyclists.

“The two junctions on Leeds Street were designed to make cyclists more confident in our city traffic and at the same time, increase awareness with motorists about the presence of cyclists,” says James Leeming, senior project manager at Liverpool City Council.

Urban Traffic Control

Related Content

  • February 25, 2013
    Toyota proving ground tests co-operative ITS
    Opened in November 2012, Toyota’s intelligent transportation systems (ITS) proving ground is being used to run a number of interactive tests between specially-equipped Toyota vehicles. Located at the company's Higashi-Fuji Technical Centre in Susono City, Japan, the ITS proving ground is a 3.5-hectare site that faithfully replicates a real urban environment, complete with intersecting streets, pedestrian crosswalks, and traffic signals. It is equipped with optical beacons, government-allocated 760 MHz trans
    Read More
  • October 6, 2015
    Iteris focuses on intersection safety with SmartCycle
    Iteris is promoting intersection safety and detection here at the ITS World Congress, with two innovative products: SmartCycle and Vantage Vector. SmartCycle is an award-winning and patented bicycle detection system that was first released in 2012. A newly released generation enhances the accuracy and capabilities of the system to detect and differentiate bicycles in unique situations such as bike boxes, lane splitting and other realworld and innovative configurations that are becoming more popular worldwid
    Read More
  • April 19, 2012
    Unlit bollard liability for UK authorities
    A ruling by a court in Cambridge is likely to have major implications for councils and authorities across the UK after a cyclist won compensation when he collided with a bollard at night. These were placed on a cycle route to prevent vehicular access to the cycle path, which runs alongside the River Cam and is used day and night by cyclists who commute to/from Cambridge, as a safer alternative to using the busy A10.
    Read More
  • December 20, 2012
    San Antonio GPS-based BRT gets the green light
    San Antonio, Texas, is launching a new GPS-based bus rapid transit system (BRT) that keeps San Antonio’s new VIA Primo bus fleet on-schedule with minimal impact on individual traffic flow. Siemens Road and City Mobility business has worked together with Trapeze Group to create a new transit signal priority (TSP) solution that they say is the first of its kind to use a ‘virtual’ GPS-based detection zone for transit vehicle traffic management without the need for physical detector equipment at the intersectio
    Read More

Highlighted Content