City of Liverpool relies on thermal imaging to boost cycling

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer. The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.
April 22, 2016 Read time: 2 mins

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed 6778 Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer.

The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.

The city developed a dedicated cycle scheme for Leeds Street, which links directly with The Strand, where the historic Waterfront and Three Graces are located. The scheme is funded by the Regional Growth Fund via the UK Department for Business, Innovation and Skills and includes road resurfacing, innovative traffic signals, LED street lighting, public realm regeneration, cycle and pedestrian facilities and capacity improvements.

On completion, the scheme should improve transport links by removing pinch points at junctions. It will also increase the capacity of the Leeds Street route, which links North Liverpool with the city’s commercial district.

Traffic signals at the two junctions display a green bike before the full green for other traffic, allowing cyclists a five second head start on other vehicles. The signal expires when the full green light comes on. The signals are powered by Flir ThermiCam sensors, which detect cyclists and distinguish them from other vehicles, meaning the advance lights are not used when there are no cyclists, avoiding delays to other road users.

ThermiCam uses the thermal energy emitted from vehicles and cyclists and is able sensor to detect vehicles and cycles in both daylight and darkness, over a long range and in difficult weather conditions. In Liverpool, the sensor transmits its cycle detection information to the traffic light controller to provide a more dynamic control of traffic lights, resulting in reduced vehicle idling time, improved traffic flow and improved safety and mobility for cyclists.

“The two junctions on Leeds Street were designed to make cyclists more confident in our city traffic and at the same time, increase awareness with motorists about the presence of cyclists,” says James Leeming, senior project manager at Liverpool City Council.

Urban Traffic Control

Related Content

  • January 31, 2012
    Intersection collision avoidance system trial
    Although much of the emphasis of research into intersection management has tended to concentrate on the needs of urban locations, there remain specific issues pertaining to rural intersections which need to be addressed. Here, Rebecca Szymkowski and Greg Helgeson, Wisconsin DOT, Todd Szymkowski, University of Wisconsin-Madison, and Craig Shankwitz and Arvind Menon, University of Minnesota detail progress on an intersection collision avoidance system for more remote locations.
    Read More
  • February 10, 2023
    Manchester has £14m integrated travel funding
    North-west English region progresses plans to improve buses and active travel
    Read More
  • October 28, 2014
    Independent review says most bus lanes should go
    An independent review of Liverpool’s bus lanes is recommending that the majority be removed, but four in the city centre will be retained. On a number of other routes, measures such as bus detector loops are recommended. The city’s 26 bus lanes were suspended in October 2013 to monitor and analyse the effects on congestion and traffic flow. Transport consultant Mott MacDonald has carried out the review and their work was supported by groups of elected members, bus operators and the partners.
    Read More
  • November 17, 2020
    Bosch reveals VaaS solutions for intelligent intersections
    On-street parking near intersections, and along corridors, and storefronts in close proximity to roadways, can obstruct views of pedestrians. Combine these factors with the increase in distracted pedestrians, and it is clear why strategies to make such vulnerable road users more visible to motorists are essential to the safety of intersections and pedestrian crossings.
    Read More

Highlighted Content