Skip to main content

City of Liverpool relies on thermal imaging to boost cycling

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer. The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.
April 22, 2016 Read time: 2 mins

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed 6778 Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer.

The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.

The city developed a dedicated cycle scheme for Leeds Street, which links directly with The Strand, where the historic Waterfront and Three Graces are located. The scheme is funded by the Regional Growth Fund via the UK Department for Business, Innovation and Skills and includes road resurfacing, innovative traffic signals, LED street lighting, public realm regeneration, cycle and pedestrian facilities and capacity improvements.

On completion, the scheme should improve transport links by removing pinch points at junctions. It will also increase the capacity of the Leeds Street route, which links North Liverpool with the city’s commercial district.

Traffic signals at the two junctions display a green bike before the full green for other traffic, allowing cyclists a five second head start on other vehicles. The signal expires when the full green light comes on. The signals are powered by Flir ThermiCam sensors, which detect cyclists and distinguish them from other vehicles, meaning the advance lights are not used when there are no cyclists, avoiding delays to other road users.

ThermiCam uses the thermal energy emitted from vehicles and cyclists and is able sensor to detect vehicles and cycles in both daylight and darkness, over a long range and in difficult weather conditions. In Liverpool, the sensor transmits its cycle detection information to the traffic light controller to provide a more dynamic control of traffic lights, resulting in reduced vehicle idling time, improved traffic flow and improved safety and mobility for cyclists.

“The two junctions on Leeds Street were designed to make cyclists more confident in our city traffic and at the same time, increase awareness with motorists about the presence of cyclists,” says James Leeming, senior project manager at Liverpool City Council.

UTC

Related Content

  • February 5, 2015
    London’s cycle superhighways get the go ahead
    London’s streets will become more accessible for cyclists now that the Transport for London (TfL) Board has approved plans for the construction of four new cycle superhighways and upgrades to the four existing cycle superhighway routes as part of the Mayor’s Cycling Vision. The schemes, which will cost around US$243 million to deliver between now and the end of 2016, will help treble the number of cycle journeys made over the next ten years and transform London’s streets and spaces to places where cyclis
  • December 16, 2013
    London gets low-level lights for cyclists
    New low-level traffic lights designed for cyclists have been authorised for use following safety trials, the first time the lights have been used in the UK, transport minister Stephen Hammond has announced. More than 80 per cent of cyclists favoured the use of low-level signals during the track-based trials of the system, which works by repeating the signal displayed on main traffic lights at the eye level of cyclists.
  • June 9, 2014
    Bristol trials new cycle safety technology
    As part of an ongoing trial funded by five West of England local authorities, UK bus operator First West of England will for the first time be test driving state-of-the-art cycle safety technology on two of its buses on the busy Gloucester Road route in the city of Bristol. Developed by Fusion Processing, CycleEye technology aims to reduce the growing number of cyclist collisions and casualties across the country involving large commercial vehicles. CycleEye is fitted to the side of the vehicle and
  • March 16, 2016
    Westminster detects disabled parking bay abuse
    Westminster trials scheme to detect non-qualifying motorists using disabled parking bays. The provision of disabled parking bays has become commonplace - but so has the abuse of these bays by able-bodied motorists. Now, London’s Westminster City Council is running a trial of technology that detects when a vehicle is illegally parked in a disabled bay.