Skip to main content

C-ITS requires EC to develop interoperability framework, warns ASECAP

The European Commission (EC) must create a regulatory framework to avoid fragmented deployment of co-operative intelligent transport systems (C-ITS). That is the view of ASECAP – the European Association of Operators of Toll Road Infrastructure - which warns that current installations need to communicate with future solutions. All C-ITS stations must be interoperable, the organisation adds.
June 26, 2018 Read time: 1 min
The 1690 European Commission (EC) must create a regulatory framework to avoid fragmented deployment of co-operative intelligent transport systems (C-ITS). That is the view of 486 ASECAP – the European Association of Operators of Toll Road Infrastructure - which warns that current installations need to communicate with future solutions. All C-ITS stations must be interoperable, the organisation adds.


C-ITS allows road users and traffic managers to share information and use it to co-ordinate their actions. The technology is enabled by digital connectivity between different vehicles which can also connect with transport infrastructure.

“The more specific the market framework, the less problems interoperability and compatibility will pose later,” ASECAP says.

Additionally, the association believes clear standards and specifications will ease the entry of new technologies and prevent fragmentation.

“Experience with electronic road charging shows how costly the fragmented deployment of technologies can be and how much time it can take to establish interoperability, once different systems are in the field”, ASECAP concludes.

For more information on companies in this article

Related Content

  • Machine vision needs standards to fulfil ITS demands
    May 28, 2014
    No-one should expect the enabling qualities of machine vision to come free of charge but Jason Barnes finds there is still much that ITS stakeholders can do to help reduce costs. After many years of application in high-end solutions for the enforcement and tolling sectors, machine vision is gaining traction in more general areas of traffic management. Nevertheless, those OEMs producing transport-oriented solutions which incorporate machine vision and looking to increase the technology’s share of the ITS mar
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
  • Developing new detection and monitoring technologies
    November 21, 2012
    Established detection and monitoring technologies continue to evolve, but is it time to challenge their supremacy and take a serious look at less conventional ITS? Andy Graham considers the options with Jason Barnes. For ITS system providers, the most potentially lucrative markets over the next few years are going to be the BRIC (Brazil Russia India and China) group of countries, all of which are building many miles of new roads, applying tolling to existing ones (8,000km in China alone) and implementing w
  • Copenhagen: everything's gone green
    October 3, 2018
    As the ITS World Congress arrives in Copenhagen, Adam Hill finds out how Dynniq has been helping traffic flow – and CO2 reduction - in the Danish capital. Most of the time, ‘breathing easier’ is just an expression which indicates a metaphorical sigh of relief that something has worked out alright. But it can be literally true, too. Respiratory and other potential health problems which stem from pollution in the world’s increasingly urbanised environments have been well publicised and governments are