Skip to main content

Brigade Electronics uses ultrasonic waves to boost driving safety

Brigade Electronics says its Ultrasonic Detection System can help commercial vehicle drivers who operate in confined spaces or drive at low speeds to detect objects and people in blind spots. The solution scans an area around the vehicle using ultrasonic waves to detect moving or stationary objects - and then sends an alert to the driver. Up to two Ultrasonic Detection Systems can work alongside a camera monitor system. Meanwhile, an on-screen display module mounted inside the cab warns the driver o
July 30, 2018 Read time: 1 min
4065 Brigade Electronics says its Ultrasonic Detection System can help commercial vehicle drivers who operate in confined spaces or drive at low speeds to detect objects and people in blind spots.


The solution scans an area around the vehicle using ultrasonic waves to detect moving or stationary objects - and then sends an alert to the driver.

Up to two Ultrasonic Detection Systems can work alongside a camera monitor system. Meanwhile, an on-screen display module mounted inside the cab warns the driver of obstacles by overlaying audible and visual ultrasonic data onto the camera image on the monitor.

These sensors are equipped to the front, front corners, sides and rear of the vehicle.

UTC

Related Content

  • March 1, 2013
    Traffic monitoring and hard shoulder running
    Hard shoulder running is on the increase – and the detection and monitoring of incidents on affected roads is occupying the minds of experts across Europe and the US
  • June 11, 2013
    CMOS cameras used to create video pedestrian crossing
    The city of Cologne, Germany has installed two CMOS-camera based video pedestrian light systems that will recognise waiting pedestrians and extend the green phase if there are still people crossing after the standard time allocation. The system, implemented by Siemens, uses two Flir cameras. The safe walk camera observes the waiting area. A stereo camera with two CMOS 1/3-inch mono sensors and 3 mm lenses is mounted 3.5 metres above the ground to cover an area of 12 sq m. This camera is set to recognise on
  • September 20, 2016
    Flir launches thermal fire sensor for rail coaches
    Flir Systems is taking advantage of the Innotrans 2016 exhibition in Berlin, Germany, 20-23 September, to launch the Flir RSX-F intelligent sensor for advanced fire detection inside rail coaches. The sensor uses the Flir Lepton thermal sensor and high-definition visual imaging for fire and occupancy detection as well as CCTV monitoring. The Flir RSX-F uses a thermal sensor with on-board fire detection algorithms to detect a fire faster and more accurately than conventional methods. It detects thermal
  • March 24, 2015
    Bristol installs CycleEye cycle safety technology
    Bristol City Council in the UK has unlocked funding from the Local Sustainable Transport Fund to support the installation of CycleEye cyclist sensor alert systems on a number of buses operated by the European Green Capital’s main operator First West of England. Designed by Bristol-based Fusion Processing, CycleEye has been developed to reduce the growing number of cyclist collisions and casualties. Fitted to the side of a bus, CycleEye operates night and day in all weathers, using radar and camera sensors t