Skip to main content

BlipTrack deployed for travel time measurement in Danish city

The Danish city of Aarhus, which has the second-largest urban area in Denmark after Copenhagen, has chosen BlipTrack to measure travel time and traffic flow following eight months of thorough testing of the system. The results showed that Blip Systems’ small and non-intrusive Bluetooth solution could offer the same exact information as alternative and more expensive solutions.
August 10, 2012 Read time: 1 min
The Danish city of Aarhus, which has the second-largest urban area in Denmark after Copenhagen, has chosen BlipTrack to measure travel time and traffic flow following eight months of thorough testing of the system. The results showed that 3778 Blip Systems’ small and non-intrusive Bluetooth solution could offer the same exact information as alternative and more expensive solutions.

So far, 60 BlipTrack sensors have been installed with the main purpose to measure travel time; inform and warn about queues and delays; identify problem areas; evaluate and calibrate traffic signals; improve capacity on existing roads; and detect changes in traffic patterns.

For more information on companies in this article

Related Content

  • Technology targets Red-X transgressors
    February 25, 2016
    Currently deployed technology is being used to detect motorists ignoring the ‘red-X’ signs that indicate the lane is closed, as Colin Sowman hears. With an increasing network of ‘Smart Motorways’ - all-lane running or the opening of hard shoulders during times of congestion - Highways England (HE) has identified a growing problem with ‘red-X’ compliance. The ‘red-X’ sign signifies a closed lane or lanes and used to provide a safer area for stranded motorists, emergency workers or road maintenance crews and
  • Weigh in Motion gets smarter
    January 4, 2023
    Weigh in Motion technology is at the forefront of protecting road surfaces and helping enforcement activity – but could it also play a key role in the development of Smart Cities?
  • Viaduct deck renewal creates detour dilemma for MassDOT
    May 26, 2016
    As the deck renewal of the I-91 viaduct in Springfield gets underway, David Crawford looks at the preparation and planning to ease the resulting traffic congestion. Accommodating the deck renewal of a 4km-long/four-lanes in each direction viaduct in the heart of Springfield (Massachusetts’ third largest city), has involved the state’s Department of Transportation (MassDOT) in a massive exercise in transport research and ITS-based area-wide preplanning and traffic management. Supporting a workzone of well ab
  • Monitoring, detection and control systems inside tunnels can do much to improve traveller safety
    August 6, 2013
    ITS technology can do a great deal to improve tunnel safety, as Colin Sowman discovers. It was back in April 2004 that the European Parliament adopted the EU Directive which lays down the Minimum Safety Requirements for Tunnels in the Trans-European Road Network (2004/54/EC). This was the first unitary legislation setting minimum safety standards for European road tunnels and was designed to harmonise the management of tunnel safety at a national level. Operators of existing tunnels have until 30 April 201