Skip to main content

Australian company ATC to supply traffic signal controllers for Dublin’s light rail project

Australia-based Aldridge Traffic Controllers (ATC) is to install its ATSC4 VC6 traffic signal controller in Dublin, Ireland, for the Luas Cross City Light Rail project. The new light rail system for Dublin City is the next phase of Dublin’s integrated light rail network and will pass through 25 SCATS-controlled junctions and 10 pedestrian crossings. It is the extension of the Luas Green line creating an interchange with the red line. There will be 13 new stops with 8 of these in the core city centre area.
August 16, 2017 Read time: 2 mins
Australia-based Aldridge Traffic Controllers (ATC) is to install its ATSC4 VC6 traffic signal controller in Dublin, Ireland, for the Luas Cross City Light Rail project.


The new light rail system for Dublin City is the next phase of Dublin’s integrated light rail network and will pass through 25 SCATS-controlled junctions and 10 pedestrian crossings. It is the extension of the Luas Green line creating an interchange with the red line. There will be 13 new stops with 8 of these in the core city centre area.

Transport Infrastructure Ireland (TII) is delivering the US£432 million (€368 million) project with funding being provided by the National Transport Authority. The project is being undertaken in close collaboration with Dublin City Council, the administrative body responsible for Dublin City.

Live testing of the new tram line commenced in June; the new line is expected to be fully operational with paying passengers by December 2017.

Related Content

  • Network Rail successfully tests new trains using advanced ‘in-cab’ signalling system
    August 5, 2016
    An advanced signalling system that will allow trains to travel every two to three minutes through central London was successfully tested using Govia Thameslink Railway’s new Siemens Class 700 trains for the first time. The Thameslink Programme, part of Network Rail’s Railway Upgrade Plan to provide a bigger, better, more reliable railway for passengers and businesses, achieved another milestone in the early hours of Saturday morning as it successfully ran a Class 700 train through the central London ‘cor
  • Seattle DOT chooses Peek ATC1000
    September 21, 2012
    Seattle Department of Transportation has chosen the Peel Traffic ATC-1000 controller for a King County Metro Rapid Ride corridor project. Rapid Ride is Seattle’s bus system; buses send signals to traffic lights so green lights stay green longer, or red lights switch to green faster. The systems have many advanced features including transit signal priority to help synchronise traffic lights with an approaching Rapid Ride bus, enabling the traffic signal controller to provide an effective transit priority re
  • Abu Dhabi seeks safe and efficient multi-modal ITS solutions
    December 17, 2014
    Abu Dhabi’s Department of Transport is planning to roll out its second phase ITS Strategy and Action Plan through to 2019 which will deploy a host of innovative multimodal ITS solutions. The United Arab Emirates (UAE) is continuing to experience rapid growth in both its economy and population and none more so than its capital, Abu Dhabi. To cope with the current expansion, and in anticipation of future growth, the Abu Dhabi Surface Transport Master Plan has been devised by its Department of Transport and th
  • ITS America concerned over use of 5GHz spectrum band
    February 28, 2013
    ITS America has raised con­cerns with the US Federal Communications Commission (FCC) over the potential use of the 5GHz band spec­trum by unlicensed national information infrastructure devices. It wants to protect the 5.9GHz band for dedicated short-range communications (DSRC)-based systems. These crucially underpin the development of connected vehicle (CV) technologies which could help slash the US’ annual tally of six million road traffic accidents and over 30,000 deaths. Within the US Department of Trans