Skip to main content

Arizona DoT trials dust-warning system along I-10

Arizona Department of Transportation (ADoT) has developed a system to tell drivers to slow down on part of Interstate 10 (I-10) where blowing dust reduces visibility.
November 21, 2019 Read time: 2 mins

ADoT is installing sensors, overhead message boards, variable speed limit signs, speed-feedback signs and closed-circuit cameras along the 10 mile stretch between Eloy and Picacho Peak. The prototype system is expected to begin operating in the coming weeks between mileposts 209 and 219.

Drivers entering this section of the I-10 can already see signs saying Caution: Variable Speed Limit Corridor. This alerts drivers to programmable signs that can instantly reduce the legal speed limit, ADoT says.

The variable speed limit signs are placed every 1,000 feet for the first mile in each direction and then every two miles can change from 75mph to 35mph when there is blowing dust.

Electronic message boards placed five miles apart will alert drivers to the dust, while ADoT traffic operators can use overhead message boards on the way towards the detection zone to warn drivers of potentially hazardous conditions.

Closed-circuit cameras will allow staff at ADoT’s traffic operations centre in Phoenix to see the real-time conditions on the roadway, while in-pavement sensors will report the speed and flow of traffic.

The system’s weather radar will be mounted on a 20-foot tower at the State Route 87 interchange in Elroy - which ADoT says can detect storms more than 40 miles away. It will work with 13 sensors mounted on posts next to the freeway that use beams of light to determine the density of dust particles in the air.

The $6.5 million system is partly funded by a $54 million federal Fastlane grant that ADoT received for I-10 projects to widen stretches between Eloy and Picacho and Interstate 8 in the city of Casa Grande to three lanes in each direction.

Despite the system, ADoT recommends that drivers avoid travelling if a severe storm is imminent. A motorist should pull far off the roadway, turn off their lights and remove their foot from the brake if caught in a sudden dust storm in or beyond the pilot area, ADoT adds.

UTC

Related Content

  • December 20, 2022
    Arizona dust settles with Vaisala
    PWD10 visibility sensors and RWS200 system make driving safer on wind-blown highway
  • November 25, 2015
    Arizona DOT to test prototype wrong-way vehicle detection system
    After a comprehensive study of wrong-way driving crashes on state highways and how technology may help reduce the threat, the Arizona Department of Transportation (ADOT) is planning a prototype project to use existing highway sensors to detect wrong-way vehicles and alert authorities and other motorists. ADOT director John Halikowski said the study sets the stage for the agency to develop and test a unique and innovative system to detect and track wrong-way drivers, improving opportunities for law enforceme
  • April 21, 2023
    Vaisala speeds up improved visibility in Arizona
    Arizona DoT creates automated speed limit system based on Vaisala’s PWD visibility sensors
  • November 18, 2016
    ODOT implements weather-activated speed signs
    Oregon Department of Transportation (ODOT) has implemented digital variable speed limit signs over a thirty-mile stretch of Interstate 84 between Baker City and La Grande, replacing the standard speed signs in that area. The new signs will use traffic, road, weather and visibility sensors to lower the legal speed limit when ice, snow, fog or a wreck ahead requires drivers to slow down. Along with identifying the current legal speed limit, the digital displays can also show the reason for a reduced speed,