RIDOT's wrong-way driving systems ‘halt close to fifty potential crashes’

One year after its debut, Rhode Island Department of Transportation (RIDOT) says its investment in wrong-way driving detection technology is proving to be very successful – none of the 47 wrong-way driving incidents where these systems have been installed has resulted in a wrong-way crash. Working with the Rhode Island State Police, RIDOT identified 24 high-risk locations for installing this technology at select ramps along I-95, I-195, Route 146, Route 10, Route 4, Route 6 and Routes 6/10 at Memorial Boule
May 6, 2016 Read time: 2 mins

One year after its debut, 7642 Rhode Island Department of Transportation (RIDOT) says its investment in wrong-way driving detection technology is proving to be very successful – none of the 47 wrong-way driving incidents where these systems have been installed has resulted in a wrong-way crash.

Working with the Rhode Island State Police, RIDOT identified 24 high-risk locations for installing this technology at select ramps along I-95, I-195, Route 146, Route 10, Route 4, Route 6 and Routes 6/10 at Memorial Boulevard in Providence. The detectors are designed to sense if a driver is going the wrong way and notify both the driver and RIDOT. When a wrong-way driver is detected, LED lights embedded in wrong-way signs begin flashing at the driver. If the wrong-way driver continues to drive beyond the flashing signs, State Police and local police are notified, and a message is displayed on the State's overhead electronic signs to warn other drivers in the immediate area.

The detection system cost approximately US$600,000, and was part of a larger US$2 million investment which also included upgrading the signing and striping at 145 locations (more than 200 actual ramps) across the state. The overall goal was to clearly distinguish exit ramps from entrance ramps and prevent driver confusion.

"We are extremely pleased with the results of this system," RIDOT director Peter Alviti, Jr said. "Improving highway safety and saving lives is integral to the mission of our Department. Even if the systems only prevented one wrong-way crash and the serious injuries or deaths that could have resulted, this program has proven to be a wise investment."

Urban Traffic Control Air Quality & Weather Systems

For more information on companies in this article

Related Content

  • The Asia-Pacific poses a multitude of ITS challenges
    May 30, 2014
    The Asia-Pacific ITS Forum and Exhibition in Auckland, New Zealand, provided a focus for the region’s ITS Associations. Mary Bell reports. In late April, ITS New Zealand hosted the 13th Asia-Pacific ITS Forum and Exhibition in Auckland. Around 350 delegates from 24 nations gathered to share and advance ITS applications on both strategic and technical levels and to discuss the differing and various challenges faced in the region.
    Read More
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • Distraction dominated teen driver accident causes.
    June 3, 2015
    As a new report shows that distracted driving is a bigger cause of accidents than previously thought, Jon Masters asks what should be done to counter this problem. Research carried out by the AAA Foundation for Traffic Safety has shed new light on the dangers of distraction for teen drivers. Six years of study using video analysis has shown that 58% of all crashes involving teen drivers are caused by the driver being distracted and proved that the influence of external factors is stronger than previously th
    Read More
  • Moxa provides clear vision for Caldecott Tunnel’s Fourth Bore
    September 15, 2014
    Caldecott Tunnel’s new Fourth Bore is utilising a bespoke high-capacity monitoring and communications network from Moxa. The Caldecott Tunnel connects Contra Costa and Alameda counties in Northern California and traditionally it has suffered severe congestion - especially during peak hours. Opened in 1937 as a twin-bore arrangement, by 1964 the increase in traffic volumes led to a third bore being added. Shortly after the third bore was opened a tidal flow was introduced with the centre bore alternating in
    Read More

Highlighted Content