Skip to main content

RIDOT's wrong-way driving systems ‘halt close to fifty potential crashes’

One year after its debut, Rhode Island Department of Transportation (RIDOT) says its investment in wrong-way driving detection technology is proving to be very successful – none of the 47 wrong-way driving incidents where these systems have been installed has resulted in a wrong-way crash. Working with the Rhode Island State Police, RIDOT identified 24 high-risk locations for installing this technology at select ramps along I-95, I-195, Route 146, Route 10, Route 4, Route 6 and Routes 6/10 at Memorial Boule
May 6, 2016 Read time: 2 mins

One year after its debut, 7642 Rhode Island Department of Transportation (RIDOT) says its investment in wrong-way driving detection technology is proving to be very successful – none of the 47 wrong-way driving incidents where these systems have been installed has resulted in a wrong-way crash.

Working with the Rhode Island State Police, RIDOT identified 24 high-risk locations for installing this technology at select ramps along I-95, I-195, Route 146, Route 10, Route 4, Route 6 and Routes 6/10 at Memorial Boulevard in Providence. The detectors are designed to sense if a driver is going the wrong way and notify both the driver and RIDOT. When a wrong-way driver is detected, LED lights embedded in wrong-way signs begin flashing at the driver. If the wrong-way driver continues to drive beyond the flashing signs, State Police and local police are notified, and a message is displayed on the State's overhead electronic signs to warn other drivers in the immediate area.

The detection system cost approximately US$600,000, and was part of a larger US$2 million investment which also included upgrading the signing and striping at 145 locations (more than 200 actual ramps) across the state. The overall goal was to clearly distinguish exit ramps from entrance ramps and prevent driver confusion.

"We are extremely pleased with the results of this system," RIDOT director Peter Alviti, Jr said. "Improving highway safety and saving lives is integral to the mission of our Department. Even if the systems only prevented one wrong-way crash and the serious injuries or deaths that could have resulted, this program has proven to be a wise investment."

For more information on companies in this article

Related Content

  • US 511 system, the future of traveller information?
    April 23, 2013
    What started out at the turn of the millenium as a simple dial-up travel information service has grown out of all recognition in the digital age. Pete Goldin surveys the development to date of the US 511 traveller information system. In a little over a decade, 511 has gone from its original intent – a collection of recorded messages accessible via phone for pre-trip planning – to a network of dynamic traveller information services provided by states and cities throughout the US, offering access to a wide v
  • ISS introduces wrong way detection system
    February 9, 2018
    Image Sensing Systems (ISS) has added a wrong way detection and notification system designed to alert drivers travelling the wrong way along on-ramps. The Automatic Incident Detection (AID) wrong way alerting solution can detect multiple lanes of traffic using a single camera and provides accurate detection and fast notification to help improve the safety performance of roadways. The system uses high-definition video stream from ISS’ patented RTMS Sx-300 HDCAM radar product, providing radar-based data
  • Autonomous vehicles will not prevent half of real-world crashes
    April 5, 2017
    Alan Thomas of CAVT looks at the reality behind the safety claims fuelling the drive towards autonomous vehicles
  • USDoT pilots show win-win potential for connected vehicles
    December 19, 2017
    Pete Goldin discovers the state of play with connected vehicles trials in the US and the impact of Hurricane Irma on Tampa’s pilot. The US Department of Transportation’s (USDoT’s) connected vehicle (CV) pilot sites have moved into phase 2 of the deployment programme– design, build, test and, maybe most importantly, collaborate.