Skip to main content

Real time information delivers safer work zone

Beginning in June 2011, Massachusetts Department of Transportation (MassDOT) began replacing 14 deteriorated bridge superstructures on Interstate 93 throughout the city of Medford. The project has been called the 93 FAST 14, and because of its impact on the travelling public Mass DOT has implemented the use of Smart Work Zone technology.
January 31, 2012 Read time: 2 mins
The data collection devices being utilised on the MassDOT 1-93 project are compromised of the ASTI Transportation Systems Queue Trailer with attached Wavetronix sensor

Beginning in June 2011, Massachusetts Department of Transportation (MassDOT) began replacing 14 deteriorated bridge superstructures on Interstate 93 throughout the city of Medford. The project has been called the 93 FAST 14, and because of its impact on the travelling public Mass DOT has implemented the use of Smart Work Zone technology.

The goal of the system, from 1933 ASTI Transportation Systems, is to monitor the project work zone and disseminate real-time information to MassDOT personnel, the local highway operations centre and the travelling public. Traffic conditions are expected to deteriorate because of queueing caused by high traffic volumes, work zone vehicle interference, inclement weather and grade changes. MassDOT has requested that the system provide notifications of traffic decreasing below 45 mph.

 The Smart Work Zone System on this project is not only providing minute-by-minute data collection through the use of 148 Wavetronix sensors but is also going a step further to integrate BlueToad-1835 Bluetooth technology and the integration of the State's 295 Navteq data collection to deliver the highest-quality and most timely data possible. This will allow MassDOT personnel to make incident management decisions as well as provide the travelling public with the most current information available. Having the ability to make these decisions far enough in advance of the work zone will empower the travelling motorist with re-routing capabilities, more efficient trip planning, or quite simply a safer trip through the work zone environment.

The Smart Work Zone System is controlled via a central project webpage (http://208.11.154.237/tcm/bostontunnel) and is provided in both a public viewing format and an administrative format. The administrative level, through username/password protection, allows MassDOT personnel to log directly into each device for detailed data, overriding of message boards and pan/tilt/zoom control over the Vicon cameras on the project. Implementation of this technology offers the DOT personnel complete oversight and control of all devices within the work zone, which hopefully provides the safest travelling environment possible without shutting down the road completely.

"Smart Work Zone Systems empower the driver with the ability to make informed decisions and efficient trip planning. This translates to not only a safer environment for both the motorist and the highway personnel but also a more comfortable travelling experience," says Todd Hartnett, business development manager, ASTI Transportation Systems.

For more information on companies in this article

Related Content

  • Wanco delivers portable RVMS solution for remote locations
    June 15, 2016
    Wanco has launched a new Remote Video Monitoring System (RVMS) that allows transportation agencies to install three devices on a single gantry, streamlining the deployment of multiple ITS applications that monitor work zones, traffic flow and road conditions in real time. As streaming technology has improved, DoTs and contractors are able to deploy higher resolution surveillance cameras across roadways and transit systems for various ITS applications. However, fixed systems are expensive and inflexible whi
  • New opportunities in a data-rich future
    March 19, 2014
    Jason Barnes looks at where the detection and monitoring sector is heading. In the future, there will be no such thing as an un-instrumented road. Just a short time ago, that could have been a quote from a high-level policy document but with the first arrivals of vehicles with 802.11p connectivity – the door-opener to Vehicle-to-X (V2X) applications – it’s a statement which has increasing validity. The technology which uses our roads will also provide information on road conditions but V2X isn’t the only
  • Phoenix rises to the Smart City challenge
    December 10, 2015
    Andrew Bardin Williams looks at the City of Phoenix where voters backed a $30bn plan to revamp its transportation network to cultivate a more connected community. According to a Land Use Institute study, half of all Americans and even more millennials (63%) would like to live in a place where they do not need to use a car very often. The City of Phoenix is putting in place plans to revamp its urban development and transportation policies to meet these changing quality of life perceptions.
  • Inrix aids authorities in dealing with data
    August 18, 2015
    New traffic data products and services have been launched to aid transport and urban planners and business with detailed intelligence on journey patterns, reports Jon Masters. Manual travel surveys ought soon to become a thing of the past for transport planners and the business community. The technology now exists for getting sophisticated levels of traffic and trip data from connected vehicles. Cars and commercial fleets carrying a GPS device, or a mobile phone or smartphone are the sources of the informat