Real time information delivers safer work zone

Beginning in June 2011, Massachusetts Department of Transportation (MassDOT) began replacing 14 deteriorated bridge superstructures on Interstate 93 throughout the city of Medford. The project has been called the 93 FAST 14, and because of its impact on the travelling public Mass DOT has implemented the use of Smart Work Zone technology.
January 31, 2012 Read time: 2 mins
The data collection devices being utilised on the MassDOT 1-93 project are compromised of the ASTI Transportation Systems Queue Trailer with attached Wavetronix sensor

Beginning in June 2011, Massachusetts Department of Transportation (MassDOT) began replacing 14 deteriorated bridge superstructures on Interstate 93 throughout the city of Medford. The project has been called the 93 FAST 14, and because of its impact on the travelling public Mass DOT has implemented the use of Smart Work Zone technology.

The goal of the system, from 1933 ASTI Transportation Systems, is to monitor the project work zone and disseminate real-time information to MassDOT personnel, the local highway operations centre and the travelling public. Traffic conditions are expected to deteriorate because of queueing caused by high traffic volumes, work zone vehicle interference, inclement weather and grade changes. MassDOT has requested that the system provide notifications of traffic decreasing below 45 mph.

 The Smart Work Zone System on this project is not only providing minute-by-minute data collection through the use of 148 Wavetronix sensors but is also going a step further to integrate BlueToad-1835 Bluetooth technology and the integration of the State's 295 Navteq data collection to deliver the highest-quality and most timely data possible. This will allow MassDOT personnel to make incident management decisions as well as provide the travelling public with the most current information available. Having the ability to make these decisions far enough in advance of the work zone will empower the travelling motorist with re-routing capabilities, more efficient trip planning, or quite simply a safer trip through the work zone environment.

The Smart Work Zone System is controlled via a central project webpage (http://208.11.154.237/tcm/bostontunnel) and is provided in both a public viewing format and an administrative format. The administrative level, through username/password protection, allows MassDOT personnel to log directly into each device for detailed data, overriding of message boards and pan/tilt/zoom control over the Vicon cameras on the project. Implementation of this technology offers the DOT personnel complete oversight and control of all devices within the work zone, which hopefully provides the safest travelling environment possible without shutting down the road completely.

"Smart Work Zone Systems empower the driver with the ability to make informed decisions and efficient trip planning. This translates to not only a safer environment for both the motorist and the highway personnel but also a more comfortable travelling experience," says Todd Hartnett, business development manager, ASTI Transportation Systems.
Urban Traffic Control

Related Content

  • August 23, 2023
    The inside story of how traffic chaos was avoided after I-95 collapse
    June’s collapse of major US roadway I-95 in Pennsylvania could have caused lengthy traffic chaos. But - relatively speaking at least - it didn’t and gridlock was avoided. Alan Dron finds out why
    Read More
  • December 17, 2014
    Communications redundancy increases VMS reliability
    Hybrid communications to variable message signs increase resilience to natural disasters and enable deployment in remote areas, as Alan Allegretto explains. Variable Message Signs (VMSs) are a common sight and a well-proven means to improve public safety on our roads and highways. ITS professionals rank the VMS as second only to interoperable radios as the most important technology to improve effectiveness during emergency incidents and evacuations. Ironically, however, current systems suffer from one criti
    Read More
  • June 6, 2018
    Gewi powers smart work zone warnings
    The main cause for work zone crashes is drivers being unaware of the approaching hazard. An off-the-shelf solution is now available and is being demonstrated here, at ITS America Detroit, by Gewi, Here Technologies and iCone. Gewi’s TIC software receives live iCone work zone ITS device data, which is then published through the Here production system. This concept was first demonstrated by Gewi at ITS World Congress in Orlando in 2011. However, the deployment here in Detroit no longer involves prototypes, b
    Read More
  • July 18, 2012
    Plug and play approach unifies workzone ITS
    Caltrans District 7 is finalising a ConOps document which will detail a plug-and-play to work zone ITS operation. The organisation's Allen Z. Chen elaborates. Before August is out, on current planning, the California Department of Transportation (Caltrans) District 7 (which covers Los Angeles and Ventura Counties, with a combined population of close to 11 million people) intends to have finalised a Concept of Operations (ConOps) document dealing with Work Zone Transportation Management Systems (WZTMS). The
    Read More

Highlighted Content