Skip to main content

Mobile crash barriers provide solid protection

The function of solid crash barriers in work zones is to separate and protect construction workers from traffic.
January 31, 2012 Read time: 2 mins
Berghaus ProTec 120 deployed on the German motorways

The ProTec 120 range of mobile crash barriers from Peter Berghaus has been independently tested by TÜV Süd in Munich, Germany with cars and trucks at various angles and different speeds (TB 21 + TB 41, TB 11 + TB 42) and has produced outstanding results, fulfilling all criteria of DIN EN 1317-2 and confirming the containment levels and effective ranges T3/W2 (without anchoring in the ground) and H1/W5. The tests and results have also given positive appraisal by the German Federal Highway Research Institute (BASt).

Berghaus points to a number of important design features that the company says sets its barriers apart. Firstly, a width of only 12cm means that ProTec doesn't restrict lane widths available within the construction site. Indeed, they take up less room than painting double white or yellow marking lines. Elements come in 10m lengths and every truck load can bring 140m ready-assembled ProTect120 elements to the construction site. Unloading, positioning and mounting takes place in an ongoing workflow with a specially designed handling gripper. Speed of installation and removal is another key benefit highlighted by Berghaus: the company cites deployment on the A9 Nuremberg to Munich motorway when its customer, FVS GmbH, erected nearly 9km of crash barriers in only two nights with just one loading crane truck and six fitters working on site.

Berghaus stresses that apart from providing total solid protection for the workforce, by choosing the right mobile crash barrier it is possible to make an active contribution to reducing traffic disruptions, congestion and accident risks when setting up, converting and dismantling changed road layouts in an absolute minimum of time.

Related Content

  • Speed cameras - road safety benefits
    October 17, 2014
    The 2014 speed camera review by the New South Wales Centre for Road Safety shows that speed cameras continue to deliver positive road safety benefits. A total of 95 fixed speed camera locations were reviewed, with 93 locations shown to be effective from the initial analysis. This positive result shows the review, now in its third year, has systematically identified ineffective fixed speed cameras for decommissioning. Overall at these fixed speed camera locations, there was a 42 per cent reduction in the
  • Austria’s answer to temporary traffic problems
    December 22, 2015
    ASFINAG has developed a mobile traffic monitoring and guidance system through a pre-commercial procurement project. Drivers have become accustomed to roadside and gantry-mounted traffic guidance and control systems along the major roads and main motorway sections. But there are occasions when intense monitoring is required on a temporary basis along motorway sections without traffic guidance and control systems and on federal and national roads too. Examples include the monitoring of the traffic flow during
  • SmogStop 'eats up' emissions threat
    March 29, 2022
    It sounds too fantastic to be true. SmogStop is a “smog-eating” highway noise wall technology, aimed at removing traffic pollution from vehicles. It’s been tested on highways in Toronto and the UK and as visitors to Intertraffic can learn, this barrier, an Innovation Award finalist, can reduce overall air pollution, NOx and PM’s by some 50%.
  • Mexico’s Durango-Mazatlan highway sets tunnel safety standard
    September 14, 2016
    Mauro Nogarin looks at the management of the longer tunnels on Mexico’s Durango-Mazatlan highway. In recent years the National Infrastructure Fund of Mexico has increased investment in the installation of ITS systems on selected highways to increase road safety. One such major investment is the 230km long Durango-Mazatlan highway which is 12m in width and has an average speed of 110km/h.