Skip to main content

The cost benefits of LED traffic signals

On 11 January 2005, the Kentucky Transportation Cabinet (KYTC) began installing GELcore LED traffic signal modules state-wide through an Energy Savings Performance Contract. In tendering for the work, the energy service contractors could choose any manufacturers equipment but all of them proposed to use the GELcore brand.
July 16, 2012 Read time: 4 mins
Ted Swansegar, Engineering Specialist for the Kentucky Transportation Cabinet. He has worked for the Cabinet for 10 years and is part of the Division that designed all the traffic signals and lighting for construction projects.
RSSOn 11 January 2005, the 6198 Kentucky Transportation Cabinet (KYTC) began installing GELcore LED traffic signal modules state-wide through an Energy Savings Performance Contract. In tendering for the work, the energy service contractors could choose any manufacturers equipment but all of them proposed to use the GELcore brand.

The background to this state-wide programme was an earlier scheme which ran from August 2002 until September 2003, during which KYTC installed some 18,000 modules at various locations. Because this was a new initiative, KYTC tracked all failures of the new LED units extensively. By the middle of 2005, over 18 months later, KYTC had experienced exactly 57 failures, 25 per cent of which were due to a flaw in its specification which called for an inline fuse in the lead wires. KYTC subsequently dropped that part of the specification.

Project:
Kentucky's state-wide replacement of incandescent traffic signals with LED modules

Cost:
$10 million

ROI:
$50 million replacement costs (5:1)
$1.6 million energy savings (82%) per year

Benefits:
Maintenance (replacement costs) cut to 1 per cent
Energy costs cut by 82 per cent
This miniscule failure rate (less than 1 per cent) compares with incandescent light units which have to be replaced on average every eight months - or an eye-watering dollar cost of (currently) around $7 million a year! The GELcore LED traffic signals deployed throughout Kentucky have an average life expectancy of 8-10 years and carry a manufacturer's warranty of seven years against failure.

Kentucky's state-wide programme, which began in January 2005, involved retrofitting some 2,500 state-maintained signals, about 1,040 school flashers, 605 beacons and 500 city-maintained signals, in addition to the replacement of around 600 signal heads which were provided by Kentucky DOT - a total of 4,645 signal locations in total for this programme.

Kentucky Transportation Cabinet

The Kentucky Transportation Cabinet is an executive branch agency responsible for overseeing the development and maintenance of a safe, efficient multimodal transportation system throughout the commonwealth.

The Cabinet manages more than 27,000 miles of highways, including roughly 20,500 miles of secondary roads, 3,600 miles of primary roads, and more than 1,400 interstate and parkway miles. The Cabinet also provides direction for 230 licensed airports and heliports and oversees all motor vehicle and driver licencing for more than 3 million drivers in the commonwealth.

The cost for all of the above was $10 million paid for through $6 million down and the balance financed over three to four years. Indeed, Kentucky made the final payment last year

Economic analysis

In responding to questions from ITS International about Kentucky's state-wide programme, Ted Swansegar, Engineering Specialist with the Kentucky Transportation Cabinet, says he has opted for conservative figures.

Taking energy savings first, Swansegar says, "From the initial study that was conducted to assess what was being achieved in powering LED units as against incandescent bulbs, most energy bills dropped from about $100 to around $18 on average, which works out at around an 82 per cent drop in energy costs.

"To put a dollar figure on that percentage saving, we estimate it to be around $1.6 million that we spent on utility bills before we installed LED traffic signal heads, based on about six cents per kW. I guess environmental people could put emissions and CO2 savings on that and come up with some kind of justifiable additional financial figure but that is outside my area of expertise."

Maintenance savings

In terms of the high savings achieved on maintenance, Swansegar says, "We are in are fourth year since the retrofit of all incandescent traffic signals throughout the state of Kentucky. In that period we have replaced about 1,000 LED modules, which equates to a failure rate of around 1 per cent. However, most have been replaced under warranty which is for seven years.

"With the replacement of about 1,000 LED modules, we have only seen about $231,000 dollars spent to replace through maintenance, which is about $231 dollars for each visit. We were usually replacing incandescent bulbs every eight months, whereas now it will be every seven or eight years. This is a huge saving which we estimate to be over $7 million a year, which is the cost for having to visit each of the 4,645 signal location on average every eight months, as against every seven years (warranty) to arrive at the ROI figure of $50 million for maintenance savings."RSS

For more information on companies in this article

Related Content

  • Managed motorways, hard shoulder running aids safety, saves time
    January 30, 2012
    The announcement that, in 2012/13, work to extend Managed Motorways to Junctions 5-8 of the M6 near Birmingham in the West Midlands is scheduled to start marks the next step for the UK's hard shoulder running concept, first introduced on the M42 in 2006. The M6 scheme is in fact one of several announced; over the next few years work will start on applying Managed Motorways to various sections of the M1, M25 London Orbital, M60 and M62. According to Paul Unwin, senior project manager with the Highways Agency
  • Avoiding the call of the wild
    June 29, 2018
    Hitting an animal on a rural road can be fatal for all parties involved – but detecting and avoiding them requires clever technology. Andrew Williams carefully scans the horizon for details. Wildlife-vehicle collisions are an ever-present threat in rural areas around the world, and there is certainly nothing funny about suddenly finding an angry moose in your headlights on a sharp bend. A variety of detection and avoidance systems are currently in use or under development to help prevent your vehicle being
  • Maryland to implement positive train control
    January 13, 2014
    In the wake of the December derailment of a New York passenger train that came off the tracks as it sped too fast into a turn, the Maryland Board of Public Works has approved a US$13 million contract to begin installing positive train control equipment, which uses GPS and radio signalling to react automatically if a collision or derailment is anticipated.
  • Cooperative road infrastructures - progress and the future
    February 1, 2012
    Robert Bertini, deputy administrator of the USDOT's Research and Innovative Technology Administration, discusses the research and deployment paths of cooperative road infrastructures. High-level analysis by the US's National Highway Traffic Safety Administration (NHTSA) of the potential of Vehicle-to-Infrastructure/Infrastructure-to-Vehicle (V2I/I2V) and Vehicle-to-Vehicle (V2V) technologies indicates that V2V could in exclusivity address a large proportion of crashes involving unimpaired drivers. In fact,