Skip to main content

Wireless charging project could change perceptions of electric vehicles

A two-year pilot project has begun in London with taxi firm Addison Lee and electric vehicle (EV) manufacturer Renault, which uses the principle of magnetic induction to jump electricity from a base station direct to the vehicle’s battery to deliver wireless charging. The charging technology being used is called Halo and has been developed by mobile innovations company Qualcomm, the organisation responsible for processors powering the latest generation of smartphones and tablets. ‘EV drivers will opt for th
October 10, 2012 Read time: 3 mins
A two-year pilot project has begun in London with taxi firm 6687 Addison Lee and electric vehicle (EV) manufacturer 2453 Renault, which uses the principle of magnetic induction to jump electricity from a base station direct to the vehicle’s battery to deliver wireless charging.

The charging technology being used is called Halo and has been developed by mobile innovations company 213 Qualcomm, the organisation responsible for processors powering the latest generation of smartphones and tablets. ‘EV drivers will opt for the simplicity of wireless charging because there’s no fuss from dirty cables that are difficult to handle in the cold and wet,’ says a Qualcomm spokesman.

Halo consists of a black pad, about the size and thickness of a newspaper, positioned centrally in a parking bay and either laid flat on the tarmac or buried slightly beneath it. The electricity running through the pad creates a virtual bubble above it and as long as the receiver unit on the car is inside that perimeter, the battery will automatically power up.

As the car approaches a Halo-enabled parking bay, it establishes a Bluetooth connection with the control unit and an alignment display switches from red to green to; after a few seconds, the screen changes to confirm power is going into the battery.

The system is currently configured to accept a domestic power supply, so it takes eight hours to charge a vehicle, although the development of a more advanced unit could reduce that time to around 90 minutes.

Using a standard EV, the Delta E4, designed and built by 6688 Delta Motorsport, that has been modified to use the wireless system, impressive results have apparently been obtained: when the battery is fully charged, it has a 140 mile range, reaches 60mph in around 6.5 seconds and has a top speed in excess of 100mph.

The Delta E4’s interior has a centrally mounted touch-screen interface, slightly smaller than an iPad, which controls everything from the audio to the air conditioning and also oversees the charging procedure.

Renault, which is supplying cars for the trial, has invested hugely in electric vehicles and is aiming to be the first mass-market manufacturer to offer a completely zero-emission model range.  Jacques Hebrard, Renault’s advanced projects director, says, “Our participation complements our European research project to demonstrate wireless induction charging of electric vehicles in a public environment with a high level of performance and safety.”

For more information on companies in this article

Related Content

  • Singapore trials first driverless EV
    August 20, 2013
    Singapore’s first driverless electric vehicle, developed by the country’s Nanyang Technological University (NTU), has taken to the streets in a test carried out along a two kilometre route. The vehicle can accommodate eight passengers and is able to travel at 20 kilometres per hour. The two-year test project, being carried out jointly by NTU, JTC and Induct Technologies, is the first of its kind in Singapore and aims to develop a vehicle that will replace shuttle buses in the country.
  • Mitsubishi launches direct view LED to display line-up
    December 5, 2017
    Mitsubishi Electric has launched the production model of its direct view narrow pixel pitch (NPP) LED screen. The VS-15NP160 (15-NP) is designed for control rooms and other indoor applications. A new anti-burn feature is said to allow static graphics to be displayed without adversely affecting performance or lifespan. The 15-NP is rated for 100,000 hours of continuous operation, with its anti-burn feature.
  • Kapsch highlights CVO capabilities of its 5.9GHz DSRC technology
    March 28, 2013
    Kapsch TrafficCom will appear at the 23rd ITS America Annual Meeting with an important recent validation of the versatility of its 5.9 GHz DSRC multi-modal, integrated and interoperable technologies. Earlier this month, the company announced it had been selected by HNTB and the Michigan DOT (MDOT) to deliver a Truck Parking Connected-Vehicle System at five sites along the I-94 corridor in Michigan.
  • TRL to participate in prestigious EV European project
    February 3, 2014
    The UK’s Transport Research Laboratory (TRL) is to participate in a large European Commission project which aims to directly address the technological feasibility, economic viability and the socio-environmental effects of dynamic on-road charging of electric vehicles (EV). Known as FABRIC (FeAsiBility analysis and development of on-Road charging solutions for future electric VehiCles), this four-year project is in response to the need to assess the potential and feasibility of a more extensive integratio