Skip to main content

Kapsch given OmniAir nod for connected vehicle RSUs

Kapsch has received certification for the RIS-9160 and RIS-9260 connected vehicle roadside units (RSUs) from the OmniAir consortium. The green light from OmniAir confirms RSUs meet operational standards set by the Institute of Electrical and Electronic Engineers, Society of Automotive Engineers and specifications from the US Department of Transportation (USDoT). The company says each unit enables Vehicle to Infrastructure communication when implemented with corresponding in-vehicle on-board units (OBUs).
October 7, 2019 Read time: 1 min

81 Kapsch has received certification for the RIS-9160 and RIS-9260 connected vehicle roadside units (RSUs) from the 808 OmniAir consortium.

The green light from OmniAir confirms RSUs meet operational standards set by the Institute of Electrical and Electronic Engineers, Society of Automotive Engineers and specifications from the 324 US Department of Transportation (USDoT).

The company says each unit enables Vehicle to Infrastructure communication when implemented with corresponding in-vehicle on-board units (OBUs). The dual-band RIS-9260 was certified for the DSRC radio setting but has an option for users to choose operation between a DSRC and cellular Vehicle to Everything communication which - according to Kapsch - allows the RSUs to communicate with certified OBUs from other vendors.

The RSUs were tested for Wireless Access in Vehicular Environments and USDoT RSU specification compliance by European vehicle inspection company 7114 DEKRA.

Related Content

  • Connected Vehicles test vehicle to vehicle applications
    January 19, 2012
    In the US, the ITS Joint Program Office is about to conduct a series of Driver Clinics intended to gauge public reaction to Connected Vehicle safety technologies and applications. Starting in August, the US Department of Transportation (USDOT) will test Vehicle-to-Vehicle (V2V) applications with everyday drivers in what it describes as 'normal operational scenarios'. These Driver Clinics are being carried out at six locations across the US and together with the subsequent model deployment beginning in 2012,
  • US to test connected vehicle technologies in six cities
    April 25, 2012
    The US Department of Transportation has announced the six cities where it will hold Driver Acceptance Clinics for the connected vehicle programme. The first clinic will be held in Brooklyn, MI, near Detroit, in August, while the remaining clinics will be held in Minneapolis, Orlando, FL, Blacksburg, VA, Dallas and San Francisco.
  • China paves way to enhanced safety with C-V2X
    September 30, 2021
    China is blazing a trail for C-V2X technology and paving the way for deployments worldwide, explains Qualcomm Technologies' Jim Misener
  • Frequency changes threaten vehicle safety applications
    January 24, 2012
    The use of frequency spectrum at 5.9GHz for vehicle safety applications is at risk because of two draft bills currently before Congress. Here, we look at why and what’s being done to address the issue. In the US, the right of cooperative infrastructure to use frequency at 5.9GHz is under threat as a result of the proposal of two bills in Congress. The chronology of spectrum allocation for Dedicated Short- Range Communications (DSRC)-based Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) safety a