Skip to main content

High speed surfing in France and Italy

Two announcements on the same day – from the OCEA Consortium and from Andrew Solutions - have reported overcoming the challenges of internet access in high-speed trains travelling at over 200mph (320km/h) in France and Italy. The technological achievements realised by the consortium have risen to the challenge of ensuring service at high speed in a high voltage electrical environment, and integrating the system's maintenance into the overall maintenance schedules of a high-speed network with no impact on th
May 18, 2012 Read time: 2 mins
Two announcements on the same day – from the OCEA Consortium and from Andrew Solutions - have reported overcoming the challenges of internet access in high-speed trains travelling at over 200mph (320km/h) in France and Italy.

The technological achievements realised by the consortium have risen to the challenge of ensuring service at high speed in a high voltage electrical environment, and integrating the system's maintenance into the overall maintenance schedules of a high-speed network with no impact on the rotation of trains.

"Providing Internet connectivity at 320 km/h was a new challenge that we are all proud to have successfully addressed for the SNCF," commented Philippe Roger of 5636 Orange Business Services.
Meanwhile, 1983 Telecom Italia called on Andrew Solutions’ 950 CommScope division to provide its equipment, commissioning services, and expertise in support of 2G and 3G wireless networks on 5637 Trenitalia Frecciarossa high speed trains. The Frecciarossa high speed train line is the fastest in Trenitalia’s fleet, with speeds reaching between 300-350 kilometers per hour.

As part of the new coverage and capacity project led by Telecom Italia, Andrew’s in-train solution is extending reliable wireless signals to passengers and staff on all 60 Frecciarossa trains. High speed trains’ metalised windows can dramatically reduce signal penetration into the carriages, resulting in spotty coverage and an increase of dropped calls. The pure speed of high speed trains complicates the hand off of wireless signals between base stations. And the complexities of different terrain and rapidly changing outdoor signal levels of the various networks involved increase the complexity.

Andrew’s wireless coverage solution is helping produce elongated cells that reduce the number of handovers required while boosting signal strength within the handover region. The company supplied about 600 Node AM dual band digital repeaters and kilometres of Radiax radiating cable with connectors and accessories, in addition to helping design and commission the wireless coverage system. An Andrew Node AM repeater, pickup antenna for GSM 900 MHz/UMTS 2100 MHz/GPS frequency bands, and metres of Radiax are installed in each Frecciarossa train carriage.

For more information on companies in this article

Related Content

  • Nedap launches Transit Ultimate Microwave RFID reader
    October 6, 2015
    Nedap, a specialist in systems for long-range identification, wireless vehicle detection and city access control, will use the 2015 ITS World Congress, to introduce the next generation of Microwave RFID reader, Transit Ultimate, that identifies vehicles and drivers at a distance of up to 10 metres (33 ft.) and a travelling speed of up to 200 km/h (125 mph) by using semi-active (2.45 GHz) RFID technology. The new Transit Ultimate contains a second communication channel at 433 MHz that enables a wider bandwid
  • Continental says Ethernet is car networking technology of the future
    March 15, 2012
    International automotive supplier Continental has joined the OPEN Alliance SIG (One Pair Ether-Net Alliance Special Interest Group) which is dedicated to spreading the use of Ethernet networks as the standard solution for in-vehicle applications.
  • Kapsch communication solutions to modernise French railway
    June 4, 2014
    French railway network Réseau Ferré de France (RFF) and railway manager Synerail have appointed Kapsch CarrierCom to accelerate the modernisation of the country’s existing GSM-R network with a next generation all-IP core solution based on the new Kapsch R4 architecture. The system will provide RFF and Synerail enhanced reliability and is the basis for innovative applications such as Railway Emergency Call (eREC) or train geolocation.
  • Siemens systems for Nottingham trams, Dubai metro
    March 28, 2014
    Construction work has started on Nottingham's expanding tram network to extend the service to the south and southwest of the city. The extension will more than double the size of Nottingham's tram network with 17.5 kilometres of new track and 28 new tram stops. As part of the project, Siemens will supply and install 33 new ST950 extra low voltage (ELV) junction controllers, eight signalised pedestrian crossings and 80 ELV tram signals. Junction controllers at a number of existing sites will also be upgra