Skip to main content

Cellular coverage on trains to get boost

According to Ingo Flomer, director of Product Management of UK company Axell Wireless, UK transport secretary Patrick McLoughlin’s intention to upgrade the rail network to enable passengers to access high-speed mobile broadband does not go far enough to promote an integrated communications infrastructure that supports cellular (3G and 4G) coverage on-board trains. Flomer says the UK has significant technological hurdles to overcome to connect rail passengers to the cellular network. The coverage would ha
October 2, 2013 Read time: 2 mins
According to Ingo Flomer, director of Product Management of UK company 7510 Axell Wireless, UK transport secretary Patrick McLoughlin’s intention to upgrade the rail network to enable passengers to access high-speed mobile broadband does not go far enough to promote an integrated communications infrastructure that supports cellular (3G and 4G) coverage on-board trains.

Flomer says the UK has significant technological hurdles to overcome to connect rail passengers to the cellular network. The coverage would have to extend throughout the entire 14,480 kilometres of UK passenger and freight network, along with the notorious black spots found in cuttings and tunnels. UK rail operators, along with 5021 Network Rail, can overcome the particular logistical problems of installing cellular networks across such an extensive area.

There are also significant technical issues posed by modern train rolling stock. Radio frequency (RF) signals generally glance off the outside of multi-layered, metallic carriages, which results in a reduced level of RF signal propagation inside carriages and therefore, poor quality mobile coverage.

A distributed antenna system (DAS) enhances mobile phone reception in enclosed spaces such as train carriages or tunnels/metros, taking the signal either from a mobile operator’s base station or from an off-air repeater and amplifies it in hard to reach places such as tunnels.

For train operators, providing their passengers with a good cellular coverage on-board trains acts as a differentiator in a very competitive marketplace. They systems they choose to deploy should prepare them for coping with future technologies such as 4G, without having to replace equipment later down the line.

Related Content

  • March 26, 2012
    Thales wins Montreal Metro communications contract
    Société de Transport de Montréal (STM) has awarded Thales a contract for a high performance broadband radio network communication system. It will comprise a management system, over 250 wayside radios, onboard radios, antennas for installation throughout the tunnels and on STM’s train fleet, network security devices and CCTV cameras for monitoring passenger flow at all station platforms.
  • December 19, 2014
    Easy upgrade to4G/LTE with low profile antenna
    With a height of 40mm (1.6 inch) the new Sencity Rail MIMO low profile 2G/3G/4G antenna from Humer and Suhner is suited to trains running in tunnels with tight gauges and double-decker trains.
  • December 20, 2017
    UK freight trains to be upgraded with European Train Control Systems
    Network Rail has contracted Siemens Rail Automation to install European Train Control System (ETCS) in-cab signalling on 750 of the UK's heaviest locomotives to improve safety and provide better use of the network with plans to retrofit the entire fleet in 2022. This technology forms part of the country's Digital Railway programme, and the government has invested £450m ($602m) as part of its National Productivity Fund. For the first phase, Siemens will install its Trainguard 200 (T200) ETCS on-board
  • September 9, 2015
    Call for RFID tags on European trains
    According to Juliette van Driel of Dutch government organisation ProRail, who is to speak on the subject at the Rail Technology Conference in Paris in November, there is a requirement for identification tags on European trains. Radio frequency identification (RFID) tags enable the monitoring and tracking of the separate components of a wagon, such as axles and wheels, over time. This enables the early identification of locomotive, carriage and wagon defects and the prevention of derailments. “It’s imp