Skip to main content

Cellular coverage on trains to get boost

According to Ingo Flomer, director of Product Management of UK company Axell Wireless, UK transport secretary Patrick McLoughlin’s intention to upgrade the rail network to enable passengers to access high-speed mobile broadband does not go far enough to promote an integrated communications infrastructure that supports cellular (3G and 4G) coverage on-board trains. Flomer says the UK has significant technological hurdles to overcome to connect rail passengers to the cellular network. The coverage would ha
October 2, 2013 Read time: 2 mins
According to Ingo Flomer, director of Product Management of UK company 7510 Axell Wireless, UK transport secretary Patrick McLoughlin’s intention to upgrade the rail network to enable passengers to access high-speed mobile broadband does not go far enough to promote an integrated communications infrastructure that supports cellular (3G and 4G) coverage on-board trains.

Flomer says the UK has significant technological hurdles to overcome to connect rail passengers to the cellular network. The coverage would have to extend throughout the entire 14,480 kilometres of UK passenger and freight network, along with the notorious black spots found in cuttings and tunnels. UK rail operators, along with 5021 Network Rail, can overcome the particular logistical problems of installing cellular networks across such an extensive area.

There are also significant technical issues posed by modern train rolling stock. Radio frequency (RF) signals generally glance off the outside of multi-layered, metallic carriages, which results in a reduced level of RF signal propagation inside carriages and therefore, poor quality mobile coverage.

A distributed antenna system (DAS) enhances mobile phone reception in enclosed spaces such as train carriages or tunnels/metros, taking the signal either from a mobile operator’s base station or from an off-air repeater and amplifies it in hard to reach places such as tunnels.

For train operators, providing their passengers with a good cellular coverage on-board trains acts as a differentiator in a very competitive marketplace. They systems they choose to deploy should prepare them for coping with future technologies such as 4G, without having to replace equipment later down the line.

Related Content

  • Maryland to implement positive train control
    January 13, 2014
    In the wake of the December derailment of a New York passenger train that came off the tracks as it sped too fast into a turn, the Maryland Board of Public Works has approved a US$13 million contract to begin installing positive train control equipment, which uses GPS and radio signalling to react automatically if a collision or derailment is anticipated.
  • Berg Insight: 3G/4G technologies will dominate cellular M2M communications
    August 26, 2014
    According to a new research report from analyst firm Berg Insight, the global cellular machine to machine (M2M) market has entered a period of transition from 2G to 3G/4G technologies. The share of cellular M2M devices connected to HSPA/LTE networks is projected to more than double from less than 20 percent at the end of 2014 to more than 50 per cent by 2018. When it comes to device shipments, 3G/4G is expected to overtake 2G already in 2017. HSPA will be the largest technology in an intermittent period unt
  • First trial of 4G LTE technology in a mass transit system
    August 9, 2016
    French public transport operator Régie Autonome des Transports Parisiens (RATP) and Nokia have successfully completed the first trial of 4G LTE technology on a portion of the Paris Metro line 14. According to RATP, the trial demonstrated that a single 4G LTE network can be used for all operational train communications, which are currently supported by different channels – a mixture of wi-fi, digital radio and 3G/4G networks. The test demonstrated that a single LTE mobile network can replace tradition
  • EdgeVis removes bandwidth barriers to mobile streamed video
    October 26, 2017
    A new generation of video compression can lower transmission costs of data and make streaming from mobile and body-worn cameras a reality, as Colin Sowman discovers. Bandwidth limitations have long been the bottleneck restricting the expanded use of video streaming for ITS, monitoring and surveillance purposes. Recent years have seen this countered to some degree by the introduction of ‘edge processing’ whereby ANPR, incident detection and other image processing is moved into (or close to) the camera, so