Skip to main content

'Green' traffic signs

A new solar-powered, wireless automated rotary drum sign system, manufactured by Skyline Products Traffic Division and currently being deployed in Texas, is being hailed as one of the greenest, least expensive, most flexible means of managing traffic flow.
January 30, 2012 Read time: 2 mins
A new solar-powered, wireless automated rotary drum sign system, manufactured by 732 Skyline Products Traffic Division and currently being deployed in Texas, is being hailed as one of the greenest, least expensive, most flexible means of managing traffic flow.

This exclusive technology was designed as part of a breakthrough programme by the 375 Texas Department of Transportation and engineers and consultants 731 Walter P Moore to create more efficient travel through the El Paso, Texas metropolitan area during traffic incidents and closures on the interstate. The new signs require no fibre-optic cable, hard-wired communications or power, making it possible to install them just about anywhere.

The Automated Rotary Drum Sign System is claimed to be the only automated diversion sign of its kind. “Most of the time, they display standard guide sign information. When an incident occurs, information is sent wirelessly and the signs are activated. The drums rotate and provide appropriate detour information,” explains Mark Conway, director of ITS, Walter P Moore.

“Eliminating the need to run power to each site, including trenching, conduit, power, labour and continued maintenance can plausibly save departments of transportation and taxpayers everywhere millions of dollars,” says Adam Lyons, regional sales manager at Skyline Products. “At the same time we are increasing the options for traffic diversion and delivering all the benefits of improved traffic flow, such as reduced driver frustration and reduced CO2 emissions.”

Some 94 sign units, with various message configurations, are currently being installed by long-time Skyline partner, Tri-State Electric, along Interstate Highway 10, US 54 and Loop 375 in El Paso, Texas.

For more information on companies in this article

Related Content

  • Progressing work zone safety systems
    February 1, 2012
    David Crawford investigates progress in a key safety area - work zones. Highway construction zone safety is taken seriously enough in the US to merit a special spring National Work Zone Awareness Week, which in 2010 ran from 19-23 April. Headed by the US Department of Transportation's Federal Highway Administration (FHWA), this aims to reduce an annual toll of work zone deaths - 720 in 2008 (an average of one every 10 hours) with more than 40,000 traffic injuries (an average of one every 13 minutes).
  • Progressing work zone safety systems
    February 6, 2012
    David Crawford investigates progress in a key safety area - work zones
  • Rotating motorway sign pole reduces need for road closures
    September 25, 2014
    Crown International says its second generation of cantilever pole is producing significant savings in the cost of managing and maintaining with large motorway signs. The rotating and lowering, counter-balanced cantilevered pole (designated VMC) was developed for applications ranging from large matrix signs and CCTV to tolling, surveillance and automatic number plate recognition (ANPR) cameras. Rather than requiring maintenance engineers to work at height above the carriageway, the pole can be manually ro
  • Real time active traffic management improves travel times
    July 17, 2012
    Traffic management centres (TMC) have traditionally served to provide surveillance and responses to traffic incidents and recurring and non-recurring changes in road networks. Typically, a TMC collected field data from the roadway and transit infrastructure and provided the integration necessary for operators to see what was happening and then coordinate a response. Standard operating procedures (SOPs) guided operators on how to respond to a given situation. It eventually became impractical for TMC operat