Skip to main content

Siemens introduces 3G wireless for UTC

A new 3G wireless communications solution which allows Siemens UTMC OTUs to be connected to the company’s PC SCOOT UTC instation has been launched by the company following extensive field trials. The newly released 3G option is available on Gemini2 and is provided by the use of an approved 3G router and antenna kit and is quick and easy to install. It allows junctions to be added onto the UTC system without the need for physically wired or fibre links, reducing installation and civil engineering costs. Ac
December 17, 2012 Read time: 2 mins
A new 3G wireless communications solution which allows 6869 Siemens UTMC OTUs to be connected to the company’s PC SCOOT UTC instation has been launched by the company following extensive field trials.

The newly released 3G option is available on Gemini2 and is provided by the use of an approved 3G router and antenna kit and is quick and easy to install.  It allows junctions to be added onto the UTC system without the need for physically wired or fibre links, reducing installation and civil engineering costs.

According to the company’s head of product management, Keith Manston, Siemens UTMC OTUs are designed to give optimum performance and when used with 3G wireless networks they offer a number of benefits. ‘In addition to the reduced cost of installation, running costs can be significantly lower than existing leased lines. More importantly, as BT has recently confirmed plans to withdraw its retail TDM services by the end of March 2018, it is now becoming increasingly important for traffic managers and local authorities to consider alternative communications options and develop a longer term transition plan’, he said.

Advances within the UTMC arena, in particular the introduction of the UG405 UTMC protocol and SCOOT MC3 has enabled SCOOT to be more tolerant of time delays in communications between the UTC software and connected Outstation Transmission Units.

In particular, this has increased the potential use of a number of alternative communication options available to users including 3G wireless networks.

Related Content

  • Siemens makes connection with Transport for West Midlands
    June 4, 2020
    Major UK C/AV deal takes in hardware and software
  • The importance of going with the flow
    April 6, 2018
    Ensuring worker safety and up-to-date driver information is crucial to ensure that roadworks are not a source of danger and delay. Andrew Williams looks at a scheme on the A14 in Cambridgeshire, UK. In recent years, portable workzone ITS solutions have emerged as important tools in the management of major roadworks and system upgrade projects - and are viewed as an increasingly vital means of ensuring any ongoing traffic flow disruption is kept to a minimum. The technology forms a central component of an
  • Priority boosts ridership and cuts congestion
    May 4, 2016
    Transit priority is proving a win-win in Europe and Australia. David Crawford reports. Technology that integrates with the Australian-originated Sydney Coordinated Adaptive Traffic System (SCATS) is driving bus signal priority and performance analysis initiatives on both sides of the world; in its homeland, with a major deployment in 2015, and in the capital of the Republic of Ireland.
  • Aberdeen opts for wireless vehicle detection
    February 26, 2013
    After several years’ experience of loop detector failures, primarily identified as being caused by damage from roadworks or degradation of aging road surfaces, Aberdeen City Council opted to use the Golden River M100 wireless detection system from Clearview Traffic. Each compact M100 sensor is typically installed in the middle of a traffic lane where it detects the presence and passage of vehicles and communicates this information wirelessly to the traffic signal controller via an access point and contact c