Siemens introduces 3G wireless option for UTC communications

A new 3G wireless communications solution which allows Siemens UTMC OTUs to be connected to the company’s PC SCOOT UTC instation has been launched by the company following extensive field trials. The newly released 3G option is available on Gemini2 and is provided by the use of an approved 3G router and antenna kit and is quick and easy to install. It allows junctions to be added onto the UTC system without the need for physically wired or fibre links, reducing installation and civil engineering costs. Acc
November 13, 2012 Read time: 2 mins
A new 3G wireless communications solution which allows 6869 Siemens UTMC OTUs to be connected to the company’s PC SCOOT UTC instation has been launched by the company following extensive field trials.

The newly released 3G option is available on Gemini2 and is provided by the use of an approved 3G router and antenna kit and is quick and easy to install.  It allows junctions to be added onto the UTC system without the need for physically wired or fibre links, reducing installation and civil engineering costs.

According to the company’s head of product management, Keith Manston, Siemens UTMC OTUs are designed to give optimum performance and when used with 3G wireless networks they offer a number of benefits. ‘In addition to the reduced cost of installation, running costs can be significantly lower than existing leased lines. More importantly, as BT has recently confirmed plans to withdraw its retail TDM services by the end of March 2018, it is now becoming increasingly important for traffic managers and local authorities to consider alternative communications options and develop a longer term transition plan’, he said.

Advances within the UTMC arena, in particular the introduction of the UG405 UTMC protocol and SCOOT MC3 has enabled SCOOT to be more tolerant of time delays in communications between the UTC software and connected Outstation Transmission Units. In particular, this has increased the potential use of a number of alternative communication options available to users including 3G wireless networks.
Networking & Communication Systems Urban Traffic Control

Related Content

  • Substantial savings from smarter street lighting
    February 25, 2015
    As authorities strive to reduce expenditure and carbon emissions, Colin Sowman looks at some of the smart ways of managing street lighting while containing costs and maintaining safety. Street lighting can account for 40% of an authority’s energy consumption. So, faced with the need to reduce outgoings, some authorities are looking for smart ways of managing street lighting or even turning off swathes of street lights in the small hours. Back in 2008 the E-street Initiative report concluded that authorities
    Read More
  • Multi-hop data radio
    January 31, 2012
    The new Multi-Hop Data Radio from Banner Engineering extends the reach of the company's SureCross wireless systems by repeating transmissions in 3km 'hops' to a multi-hop total of 20km or more. Using the system, clusters can be combined and connected to create networks with 2,400 wireless points, covering over 100km2. The company says its system can be used to connect a wide variety of field devices directly, including PLCs, controllers, HMIs, DCSs, transmitters and level, pressure and temperature sensors.
    Read More
  • TfL trials cyclist detection
    June 5, 2015
    New world first trials would allow TfL to better cater for cyclists at key junctions Further on-street trials will take place later this year TfL now given blanket approval from DfT to install low-level cycle signals at junctions Transport for London (TfL) is to trial a new technology that will help give cyclists more time on green lights.
    Read More
  • On a WIM – a global view of weigh in motion
    May 25, 2016
    Q-Free’s Andrew Lees looks at regional characteristics and technology trends in the global Weigh-In-Motion market. The principles of Weigh-In-Motion (WIM) are well established. Data derived from vehicles passing over in-ground sensors can be interpreted for vehicle classification (axle counts and spacing) and positive identification (especially when linked to image capture) applications as well as to derive individual axle and gross vehicle weight (GVW).
    Read More

Highlighted Content