Skip to main content

LowCVP calls on truck operators and others to focus on cutting truck emissions

To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs. In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology
October 22, 2015 Read time: 3 mins
To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs.

In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology; conversion to the use of natural gas/biomethane; and supporting the uptake of hybrid and pure electric vehicles, particularly for use in urban environments.

The Partnership will be holding a stakeholder workshop in late November to progress the LowCVP’s commercial vehicle activity, including the accreditation scheme for after-market technologies as well as providing opportunities for operators and others to collaborate in a new, DfT-funded test programme to benchmark vehicles powered by natural gas/biomethane. The group will also commence activity on the specific actions needed to stimulate low carbon urban freight solutions

The workshop will also provide the opportunity to connect with and influence the future work programme of the LowCVP’s Commercial Vehicle Working Group, which will drive forward these and other initiatives in the freight decarbonisation area.

One of the key opportunities identified in earlier LowCVP work for cutting carbon from HGVs in the UK was to increase the uptake of existing retrofit technology by operators in the market. Independent verification of the performance of technologies and a credible assessment of the applicability of equipment to different operational environments were identified as key requirements.

A test process has already been developed and is ready for peer review and launch. The next phase will be to develop an umbrella accreditation process for approving/certifying low carbon technologies for HGV applications. The scheme will also assess the operational characteristics of the technologies, and their applicability, for potential operators.

The scheme will provide test results and recommendations to DfT/OLEV for stimulating uptake. Its test protocol has many potential future applications in the evaluation of cleaner truck technologies.

With the Low Carbon Truck Trial (LCTT) nearing its final phase, and the emergence of Euro VI gas vehicle technology for HGVs, the LowCVP is also managing a new test programme for the 1837 Department for Transport to benchmark the latest gas trucks for emissions including methane, carbon dioxide (CO2) and NOx, and fuel consumption.

The project will compare the performance and emissions of gas vehicles (both OEM and retrofit conversions) with their direct diesel counterparts in a consistent manner using the latest PEMS equipment run over repeatable, realistic and representative track cycles. The outputs from the project will provide the comprehensive evidence-base needed on gas use in HGVs for the formation of long-term government policy options in this sector.

Andy Eastlake, LowCVP's MD said "In terms of road transport, most of the focus in recent years has been on cutting emissions from cars and buses. Road freight in vans and trucks is responsible for around 35 per cent of the UK’s total road CO2 emissions and there are plenty of opportunities for the sector to make a real contribution to the UK’s climate targets – as well as helping to cut operators’ costs and contribute to improvements in air quality.”

For more information on companies in this article

Related Content

  • Barcelona's bike share scheme a life saver
    January 26, 2012
    A recent study of the health benefits of Barcelona's Bicing communal bike share scheme, reveals it is a life-saver, responsible for saving 12 lives a year. Barcelona's community bicycle programme, Bicing, was inaugurated in March 2007. One of several schemes operated in cities around the world by Clear Channel, it has fulfilled its role of providing an efficient, ecologically friendly and critically important form of transport, helping to increase urban mobility and reduce street congestion. Clear Channel h
  • Weigh in Motion gets smarter
    January 4, 2023
    Weigh in Motion technology is at the forefront of protecting road surfaces and helping enforcement activity – but could it also play a key role in the development of Smart Cities?
  • Confusion over electric motors for heavy trucks
    December 19, 2016
    According to Dr Peter Harrop of research company IDTechEx, there is still no agreement on the best type of electric motor to use in heavy trucks. The company’s analysis indicates that the booming, confusing traction motor business will rise to around US$400 billion in 2027. Its new report, Electric Motors for Electric Vehicles 2017-2027 navigates the jargon, the design options and the disagreements. The changing needs and evolving technology are matched to create forecasts and technology timelines based
  • Ricardo launches vehicle emissions monitoring service
    March 20, 2017
    UK-based Ricardo Energy & Environment, working with technology partner OPUS Inspection, has launched a vehicle emissions monitoring service for the measurement of emissions from vehicles on UK roads. Installed at locations of interest, the system records driving emissions in a completely non-intrusive manner from each passing vehicle, including nitric oxide, nitrogen dioxide, particulate matter, hydrocarbons, carbon monoxide and ammonia. The system can also be linked to automatic number plate recogniti