Skip to main content

LowCVP calls on truck operators and others to focus on cutting truck emissions

To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs. In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology
October 22, 2015 Read time: 3 mins
To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs.

In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology; conversion to the use of natural gas/biomethane; and supporting the uptake of hybrid and pure electric vehicles, particularly for use in urban environments.

The Partnership will be holding a stakeholder workshop in late November to progress the LowCVP’s commercial vehicle activity, including the accreditation scheme for after-market technologies as well as providing opportunities for operators and others to collaborate in a new, DfT-funded test programme to benchmark vehicles powered by natural gas/biomethane. The group will also commence activity on the specific actions needed to stimulate low carbon urban freight solutions

The workshop will also provide the opportunity to connect with and influence the future work programme of the LowCVP’s Commercial Vehicle Working Group, which will drive forward these and other initiatives in the freight decarbonisation area.

One of the key opportunities identified in earlier LowCVP work for cutting carbon from HGVs in the UK was to increase the uptake of existing retrofit technology by operators in the market. Independent verification of the performance of technologies and a credible assessment of the applicability of equipment to different operational environments were identified as key requirements.

A test process has already been developed and is ready for peer review and launch. The next phase will be to develop an umbrella accreditation process for approving/certifying low carbon technologies for HGV applications. The scheme will also assess the operational characteristics of the technologies, and their applicability, for potential operators.

The scheme will provide test results and recommendations to DfT/OLEV for stimulating uptake. Its test protocol has many potential future applications in the evaluation of cleaner truck technologies.

With the Low Carbon Truck Trial (LCTT) nearing its final phase, and the emergence of Euro VI gas vehicle technology for HGVs, the LowCVP is also managing a new test programme for the 1837 Department for Transport to benchmark the latest gas trucks for emissions including methane, carbon dioxide (CO2) and NOx, and fuel consumption.

The project will compare the performance and emissions of gas vehicles (both OEM and retrofit conversions) with their direct diesel counterparts in a consistent manner using the latest PEMS equipment run over repeatable, realistic and representative track cycles. The outputs from the project will provide the comprehensive evidence-base needed on gas use in HGVs for the formation of long-term government policy options in this sector.

Andy Eastlake, LowCVP's MD said "In terms of road transport, most of the focus in recent years has been on cutting emissions from cars and buses. Road freight in vans and trucks is responsible for around 35 per cent of the UK’s total road CO2 emissions and there are plenty of opportunities for the sector to make a real contribution to the UK’s climate targets – as well as helping to cut operators’ costs and contribute to improvements in air quality.”

Related Content

  • February 16, 2018
    Canada partners with University to support Auto Innovation
    Canada has joined forces with the University of Ontario Institute of Technology (UOIT) to upgrade its Automotive Centre of Excellence (ACE) with the intention of assisting companies and researchers in their efforts to reduce carbon emissions in the automotive industry. Under the agreement, ACE will add a Moving Ground Plane – a belt that serves as a road moving under a vehicle, simulating the aerodynamic forces against moving vehicles and measuring the physical characteristics in real-world conditions.
  • March 2, 2012
    Need for standardisation of toll classes
    In a previous article Bob Lees of Idris Technology Ltd looked at the appropriateness of toll classes in relation to all-electronic toll fee collection. Here, he looks at how addressing classification standardisation could avoid downstream aggravation and cost
  • February 2, 2012
    Carbon finance delivers critical support to mass transit schemes
    David Crawford investigates carbon finance in transport. World Bank carbon finance grants are delivering critical support to major mass transit deployments in emerging and developing economies. Only recently operative in the transport sector, the Clean Development Mechanism (CDM, see panel) is designed to generate additional income streams and improve internal rates of return on projects funded from public- and private-sector sources.
  • October 29, 2015
    Counting the environmental costs of ITS deployment
    David Crawford looks at the latest thinking about calculating the benefits associated with the environmental side of ITS schemes. The penny is dropping that some environmental costs “are being shifted outside the traditional bounds of evaluation methods” for ITS-based road transport projects, according to researchers at the UK University of Leeds’ Institute for Transport Studies.