Skip to main content

LowCVP calls on truck operators and others to focus on cutting truck emissions

To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs. In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology
October 22, 2015 Read time: 3 mins
To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs.

In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology; conversion to the use of natural gas/biomethane; and supporting the uptake of hybrid and pure electric vehicles, particularly for use in urban environments.

The Partnership will be holding a stakeholder workshop in late November to progress the LowCVP’s commercial vehicle activity, including the accreditation scheme for after-market technologies as well as providing opportunities for operators and others to collaborate in a new, DfT-funded test programme to benchmark vehicles powered by natural gas/biomethane. The group will also commence activity on the specific actions needed to stimulate low carbon urban freight solutions

The workshop will also provide the opportunity to connect with and influence the future work programme of the LowCVP’s Commercial Vehicle Working Group, which will drive forward these and other initiatives in the freight decarbonisation area.

One of the key opportunities identified in earlier LowCVP work for cutting carbon from HGVs in the UK was to increase the uptake of existing retrofit technology by operators in the market. Independent verification of the performance of technologies and a credible assessment of the applicability of equipment to different operational environments were identified as key requirements.

A test process has already been developed and is ready for peer review and launch. The next phase will be to develop an umbrella accreditation process for approving/certifying low carbon technologies for HGV applications. The scheme will also assess the operational characteristics of the technologies, and their applicability, for potential operators.

The scheme will provide test results and recommendations to DfT/OLEV for stimulating uptake. Its test protocol has many potential future applications in the evaluation of cleaner truck technologies.

With the Low Carbon Truck Trial (LCTT) nearing its final phase, and the emergence of Euro VI gas vehicle technology for HGVs, the LowCVP is also managing a new test programme for the 1837 Department for Transport to benchmark the latest gas trucks for emissions including methane, carbon dioxide (CO2) and NOx, and fuel consumption.

The project will compare the performance and emissions of gas vehicles (both OEM and retrofit conversions) with their direct diesel counterparts in a consistent manner using the latest PEMS equipment run over repeatable, realistic and representative track cycles. The outputs from the project will provide the comprehensive evidence-base needed on gas use in HGVs for the formation of long-term government policy options in this sector.

Andy Eastlake, LowCVP's MD said "In terms of road transport, most of the focus in recent years has been on cutting emissions from cars and buses. Road freight in vans and trucks is responsible for around 35 per cent of the UK’s total road CO2 emissions and there are plenty of opportunities for the sector to make a real contribution to the UK’s climate targets – as well as helping to cut operators’ costs and contribute to improvements in air quality.”

Related Content

  • April 7, 2014
    Pollution has more than one solution
    Professor Alexander Baklanov of the World Meteorological Organization talks to Colin Sowman about the difficulties of reducing urban pollution. The inhabitants of Beijing have recently been suffering pollution levels 20 times the World Health Organisation’s recommended limit while the European Union is revitalising its efforts to implement and enforce air quality standards. Almost inevitably much of the clean-up efforts are likely to focus on traffic planners and engineers.
  • April 30, 2020
    Intelligent powertrains could make cost cuts
    Intelligent vehicle powertrains could be a way of making substantial cuts in operating costs and emissions. David Crawford looks at some far-reaching initiatives in Europe and North America
  • January 13, 2015
    Report finds LED replacement lamps don’t meet criteria
    The Lighting Research Center (LRC) at Rensselaer Polytechnic Institute has been conducting evaluations of LED replacement lamps, most recently those with a mogul base. Its report on phase 1 of the project, Mogul based LED replacement lamps, provides details of the market characterisation and pilot photometric testing of 18 representative mogul base LED lamps alone and in luminaires. LRC found that only four of the 18 lamps met the minimum DesignLights Consortium Qualified Products List criteria for retro
  • May 18, 2012
    First pan-European stolen truck tracking and monitoring system
    Cobra and Mercedes-Benz Trucks have announced the launch of 'Mercedes-Benz Tracking System' which is being claimed as the first pan-European stolen vehicle tracking and location monitoring system for HGVs. The covertly fitted device uses GPS/GPRS/GSM technology to provide web-based on-demand pinpoint location and stolen vehicle tracking for Actros, Axor and Atego trucks. It is the only system tested and approved by Mercedes-Benz Trucks and backed-up by a one-year manufacturer warranty.