Traffic Data Systems receives Swiss certification for WIM system

Traffic Data Systems’ WIM-DSP 32 low-speed and high-speed weigh-in-motion (WIM) system has been awarded an OIML-R134-1 certificate by the Swiss Federal Institute of Metrology, proving accuracy levels of ±5% (initial verification) and ±10% (in-service inspection) have been achieved. The Swiss institute’s supervised certification process required more than 500 test runs with different vehicles, speeds and loads.
September 19, 2017 Read time: 1 min
4592 Traffic Data Systems’ WIM-DSP 32 low-speed and high-speed weigh-in-motion (WIM) system has been awarded an OIML-R134-1 certificate by the Swiss Federal Institute of Metrology, proving accuracy levels of ±5% (initial verification) and ±10% (in-service inspection) have been achieved. The Swiss institute’s supervised certification process required more than 500 test runs with different vehicles, speeds and loads.


The WIM-DSP 32 is designed to operate with 657 Kistler’s line sensors and charge amplifiers, and features long-term sensor monitoring, an integrated colour graphics display and touch keys for easy configuration and function control. Potential uses range from data gathering to enforcement and tolling applications, including monitoring of track changes.

Classification & Data Collection

Related Content

  • October 12, 2021
    TDS: device certification 'vital'
    Traffic Data Systems (TDS) is focussing on Weigh in Motion (WIM) systems for enforcement and tolling applications. But more than that, the company is addressing the issue of device certification - in cases where customers opt for the wrong / improper certification, WIM systems will not be legal for enforcement and tolling
    Read More
  • September 16, 2021
    You need to weigh up WIM systems thoroughly, says TDS
    Traffic Data Systems (TDS) will use the ITS World Congress to focus on weigh-in-motion (WIM) systems for enforcement and tolling applications. But more than that, the company is addressing the issue of device certification - in cases where customers opt for the wrong / improper certification, WIM systems will not be legal for enforcement and tolling
    Read More
  • October 6, 2015
    TDS shows two ground-breaking products in Bordeaux
    German-based Traffic Data Systems is here at the ITS World Congress to feature two ground-breaking products – the WIM-DSP 32 for the connection of up to 32 Lineas sensors in a lead-sealable housing with IP67/EN60529 degree of protection for use under stringent environmental conditions, and the TMCS-U, a complete TLS remote monitoring station with control module, integral function groups FG1, FG2 and FG6, integral UPS, 3G modem and 16 inductive loop detectors/classifiers, which also can be used as a Road Wea
    Read More
  • March 20, 2018
    TDS exhibits OIML-R134 certified low- and high-speed WIM system
    Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
    Read More

Highlighted Content