Videology adds camera board to help users see in the dark

Videology has added another extended SDI camera board to its latest range of cameras designed for traffic monitoring, surveillance and other non-traffic functions. Designated the 24RS2.0.XWEXSDI, it can transmit 1080P HD images up to 300m (1,000ft). The camera board is designed to obtain images beyond the human eye without near-IR LED illumination, which can also be used if required. Colour noise is reduced and colour brightness is enhanced. Sony Starvis’ sensor captures the available photon beyond near-IR
January 11, 2018 Read time: 1 min

1047 Videology has added another extended SDI camera board to its latest range of cameras designed for traffic monitoring, surveillance and other non-traffic functions. Designated the 24RS2.0.XWEXSDI, it can transmit 1080P HD images up to 300m (1,000ft).

The camera board is designed to obtain images beyond the human eye without near-IR LED illumination, which can also be used if required. Colour noise is reduced and colour brightness is enhanced.

Sony Starvis’ sensor captures the available photon beyond near-IR when coupled with the optimised camera design. Additionally, the focus assist enhancement allows users to have flexibility to use any lens and the settings can auto adjust for either visible or IR illumination to reduce potential human error and the need for an NIR corrected lens.

Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Low-cost GigE camera
    February 3, 2012
    Prosilica has released the GC780, a new low-cost camera with a GigE Vision-compliant interface. The ultra-compact GC780 (33x46x38mm) features the 0.5in Sony ICX415 progressive scan CCD sensor and runs 64 frames per second at full resolution (782x582).
    Read More
  • Sony camera for ITS applications
    January 23, 2012
    Sony Europe's Image Sensing Solutions division has extended its XCG range of GigE machine vision cameras with the launch of the XCG-H280E. According to the company, its resolution, high frame rate and ability to work in low light conditions make the camera module ideally suited to ITS applications, where image quality, sensitivity and speed are paramount. The camera module implements the ICX-674 full HD resolution CCD sensor, capable of running at up to 50fps and is the first sensor to benefit from Sony's n
    Read More
  • 3M reflect on why CAVs need lines and signs
    May 10, 2017
    Tammy Meehan and Thomas Hedblom of 3M consider the ongoing development of technology needed to introduce connected and autonomous vehicles. The transportation industry is in the midst of the most dramatic shift since Henry Ford introduced horseless carriages. Already we are seeing the increased use of advanced driver assistance systems (ADAS) which, along with the introduction of autonomous vehicles in the next few decades, will bring profound changes to vehicles and the environment in which they operate.
    Read More
  • New CMOS cameras for ITS applications
    October 28, 2016
    Baumer’s new industrial camera series uses the latest generation of CMOS global shutter sensors for maximum sensitivity at short exposure time, on a high dynamic range and resolutions up to 25MP. The cameras are available in monochrome and colour and with ultra-high sensitivity within the NIR range.
    Read More

Highlighted Content