Skip to main content

Tailored to vehicle imaging

JAI is launching two new high dynamic range CMOS cameras, the TS-4032EN (monochrome and TSC-4032EN (colour), tailored to demanding vehicle imaging and vehicle recognition applications in electronic toll collection, open road tolling, journey time information, speed enforcement, red light enforcement and homeland security.
July 26, 2012 Read time: 2 mins
78 JAI is launching two new high dynamic range CMOS cameras, the TS-4032EN (monochrome and TSC-4032EN (colour), tailored to demanding vehicle imaging and vehicle recognition applications in electronic toll collection, open road tolling, journey time information, speed enforcement, red light enforcement and homeland security.

The new cameras are based on a 43.3mm progressive-scan CMOS sensor providing over three megapixels of resolution (2,048x1,628 active pixels). This enables them to cover more than a full traffic lane with a vertical field of view of 3.7m.

The devices feature no-smear technology eliminating blooming and loss of license plate data due to problems with sun glare or glint. In addition, JAI says that the CMOS sensor's inherent high dynamic range of 66dB, combined with excellent near-IR sensitivity, and a signal-to-noise ratio of greater than 58dB, provides for high image quality in both daylight and night-time conditions.

When coupled with the company's external light sensor technology in a full system configuration, the cameras' dynamic range is significantly increased. The devices also feature internal JPEG compression, automatic FTP transmission of captured images to a file server, and internal clock synchronisation via the Network Time Protocol to ensure consistent date/time stamps in multi-camera installations. A built-in PowerPC processor running real-time Linux OS simplifies the process for in-field maintenance and firmware upgrades.

For more information on companies in this article

Related Content

  • Plug and play approach unifies workzone ITS
    July 18, 2012
    Caltrans District 7 is finalising a ConOps document which will detail a plug-and-play to work zone ITS operation. The organisation's Allen Z. Chen elaborates. Before August is out, on current planning, the California Department of Transportation (Caltrans) District 7 (which covers Los Angeles and Ventura Counties, with a combined population of close to 11 million people) intends to have finalised a Concept of Operations (ConOps) document dealing with Work Zone Transportation Management Systems (WZTMS). The
  • Dual purpose for new weigh-in-motion site
    October 13, 2014
    A new weigh-in-motion weighbridge is being installed on State Highway 1 at the Rakaia Bridge to support the introduction of high productivity motor vehicles (HPMV) on this key South Island, New Zealand, freight route. The HPMV system allows vehicles carrying a divisible load of essential goods to weigh more than the official 44 metric tonnes without a permit, but only on specified routes.
  • Preparing for unpredictable precipitation
    August 18, 2015
    ITS solutions are helping streamline winter road maintenance for Delaware and Illinois, two states that must deal with dynamic weather and varying snowfall totals. Andrew Bardin Williams reports. Wilmington and Newark (pronounced new-ark) are two vastly different cities that sit on opposite ends of Delaware. Newark is a sleepy university town of roughly 30,000 residents abutting the state’s western border with Maryland and Pennsylvania, and often gets confused with its larger namesake in New Jersey.
  • Increasing and improving disabled access to public transport
    January 25, 2012
    An overview of European efforts to increase disabled access to public transport, by David Crawford