Skip to main content

Tailored to vehicle imaging

JAI is launching two new high dynamic range CMOS cameras, the TS-4032EN (monochrome and TSC-4032EN (colour), tailored to demanding vehicle imaging and vehicle recognition applications in electronic toll collection, open road tolling, journey time information, speed enforcement, red light enforcement and homeland security.
July 26, 2012 Read time: 2 mins
78 JAI is launching two new high dynamic range CMOS cameras, the TS-4032EN (monochrome and TSC-4032EN (colour), tailored to demanding vehicle imaging and vehicle recognition applications in electronic toll collection, open road tolling, journey time information, speed enforcement, red light enforcement and homeland security.

The new cameras are based on a 43.3mm progressive-scan CMOS sensor providing over three megapixels of resolution (2,048x1,628 active pixels). This enables them to cover more than a full traffic lane with a vertical field of view of 3.7m.

The devices feature no-smear technology eliminating blooming and loss of license plate data due to problems with sun glare or glint. In addition, JAI says that the CMOS sensor's inherent high dynamic range of 66dB, combined with excellent near-IR sensitivity, and a signal-to-noise ratio of greater than 58dB, provides for high image quality in both daylight and night-time conditions.

When coupled with the company's external light sensor technology in a full system configuration, the cameras' dynamic range is significantly increased. The devices also feature internal JPEG compression, automatic FTP transmission of captured images to a file server, and internal clock synchronisation via the Network Time Protocol to ensure consistent date/time stamps in multi-camera installations. A built-in PowerPC processor running real-time Linux OS simplifies the process for in-field maintenance and firmware upgrades.

Related Content

  • December 3, 2018
    Polarisation is glaringly obvious, says Sony
    Glare from the sun is a factor in a large number of road accidents – many of them fatal. But there is a solution at hand: using polarisation can mitigate the effect of glare and improve ITS camera enforcement, explains Stephane Clauss The effect of glare on driver safety has been well documented. A 2013 UK study by the country’s largest driver organisation, the AA, calculated sun glare was a contributing cause in almost 3,000 road accidents in 2012 alone. This represented one in 33 accidents on Britain’s
  • November 10, 2017
    Sony’s vision systems help limit risk in road tunnels
    Sony’s Stephane Clauss looks at the imaging requirements in tunnels. In the event of a fire inside a tunnel, the dispersion of gases and heat is prevented, creating extreme temperatures that have led to many deaths. Following tragic incidents including Mont Blanc, European legislation requires longer tunnels to be fitted with incident and smoke detection systems.
  • April 4, 2016
    Lumenera goes ‘Back to the Future’ at Intertraffic
    For Intertraffic 2016, Lumenera has a ‘Back To The Future’ themed demonstration complete with a model DeLorean car and Old West backdrop illuminated by a Metaphase LED light.
  • October 29, 2014
    On Semiconductor advances image sensing solutions
    With the recent acquisitions of Truesense Imaging and Aptina Imaging, ON Semiconductor is now a major supplier of high-performance image sensor solutions used in intelligent transportation systems (ITS), including traf¬fic enforcement, intersection monitoring, and automated number plate recognition (ANPR).