Solar cell technology cameras

A new camera range from Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright
February 2, 2012 Read time: 2 mins
The image shows a 40W light bulb, image on the left with a conventional CCD sensor and on the right with the FX4 HDR sensor
A new camera range from 822 Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright scenes, without saturation.

 The FX4 HDR sensor features a patented pixel structure that provides a truly logarithmic output with effective suppression of fixed noise and gives a dynamic range of 120 db. According to Stemmer, this equates to a 1,000 times greater brightness ratio (ratio of the highest brightness value to the lowest brightness value that can be imaged in a scene) compared to conventional linear CCD sensors, which typically have a dynamic range of 60 db.
Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Latest pedestrian safety technology from McCain
    March 19, 2014
    Designed to boost driver awareness of pedestrians, McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals. An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting appr
    Read More
  • Sony focuses on ITS applications
    May 20, 2012
    Sony is exhibiting the latest addition to its lineup of high definition block cameras designed for intelligent transportation applications. The FCB-EH3150 delivers cost-effective colour HD imaging and high sensitivity for challenging low light environments.
    Read More
  • Loop detection still has a part in traffic management
    March 2, 2012
    Bob Lees, co-founder of Diamond Consulting Services, on why the loop detector just refuses to go away. The more strident proponents of newer and emergent detection technologies are quick to highlight what they see as the disadvantages, and hence the imminent passing, of the humble inductive loop. The more prosaic will acknowledge that loops continue to have a part to play in traffic management, falling back on the assertion that it is all a question of application. And yet year after year the loop, despite
    Read More
  • Idris paves the way for loop based speed enforcement
    February 1, 2012
    With the Idris system now validated as a speed verification tool, the way is open for loops to be used in more complex enforcement applications. Diamond Consulting Services (DCS), developer of the Idris inductive loop-based vehicle detection and classification system, has recently successfully conducted validation trials which, the company says, open the way for Idris to be used for speed verification and loop-based sensors to be used for more complex applications such as speed-on-green and differential spe
    Read More

Highlighted Content