Skip to main content

Solar cell technology cameras

A new camera range from Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright
February 2, 2012 Read time: 2 mins
The image shows a 40W light bulb, image on the left with a conventional CCD sensor and on the right with the FX4 HDR sensor
A new camera range from 822 Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright scenes, without saturation.

 The FX4 HDR sensor features a patented pixel structure that provides a truly logarithmic output with effective suppression of fixed noise and gives a dynamic range of 120 db. According to Stemmer, this equates to a 1,000 times greater brightness ratio (ratio of the highest brightness value to the lowest brightness value that can be imaged in a scene) compared to conventional linear CCD sensors, which typically have a dynamic range of 60 db.

For more information on companies in this article

Related Content

  • Hikvision passes history exam
    October 13, 2020
    Hikvision technology is being used in the ancient walled city of Xi’an, historical seat of the Tang Dynasty, to boost traffic flow – and it seems to be helping in China’s new high-tech hub
  • Lufft’s MARWIS moves weather
    September 22, 2014
    A mobile road weather sensor is providing authorities with new options for monitoring road conditions and winter maintenance operations. Road and traffic engineers know the vulnerable points in their network – cold spots where ice forms first, high-banked roads where snow accumulates, fog pockets… Traditionally, most authorities will position weather stations at these points to detect and monitor road conditions during bad weather events.
  • Wider uses for weigh in motion data
    March 18, 2014
    Colin Sowman talks to Terry Bergan of International Road Dynamics about the latest uses of weigh-in-motion systems. Raising allowable truck weight limits improve transport efficiency but leaves an ever-increasing number of bridges vulnerable to being overloaded and damaged by vehicles heavier, and in some cases far heavier, than they were designed to carry. The simplistic solution is to impose weight restrictions and erect appropriate signs - but this could have severe knock-on effect on trucking operations
  • Hayden AI & Snapper Services keep their eyes on the road
    August 29, 2024
    Snapper Services CEO Miki Szikszai and Chris Carson, CEO of Hayden AI, tell Adam Hill about synergy and partnership – and how to make use of data once you’ve gathered it