Skip to main content

Solar cell technology cameras

A new camera range from Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright
February 2, 2012 Read time: 2 mins
The image shows a 40W light bulb, image on the left with a conventional CCD sensor and on the right with the FX4 HDR sensor
A new camera range from 822 Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright scenes, without saturation.

 The FX4 HDR sensor features a patented pixel structure that provides a truly logarithmic output with effective suppression of fixed noise and gives a dynamic range of 120 db. According to Stemmer, this equates to a 1,000 times greater brightness ratio (ratio of the highest brightness value to the lowest brightness value that can be imaged in a scene) compared to conventional linear CCD sensors, which typically have a dynamic range of 60 db.

For more information on companies in this article

Related Content

  • Baumer's LX cameras for inspection tasks
    October 25, 2018
    Baumer’s LX cameras are expected to offer high resolutions and frame rates up to 337fps and 3D algorithms for inspections in railway networks and catenary infrastructure. The company says the global shutter CMOS cameras provide resolutions up to 48 megapixel for inspecting tracks, rails and catenary wires. Also, the LX models come with exposure times of less than 10 µs for precise image acquisition even at high speed. For inspections of pantographs, wheels or brakes, the LX 3D cameras use laser triangula
  • The search for travel management's Holy Grail
    October 10, 2018
    Combining accurate network estimates and forecasts with real-time information is the way to deal with traffic hot spots. Alan Dron looks at products which aim to achieve just that. Traffic management authorities have for years been trying to get ahead of the game. Instead of reacting to situations, they want to be able to head them off as they occur – or even before they happen. Finding that Holy Grail of successfully anticipating problems will save time, tension and tempers on city streets. Two new system
  • Solar studs receive DfT approval
    March 31, 2014
    Rennicks UK has achieved full Department for Transport (DfT) Type Approval for their SR-15 active road studs, which use LED and solar technology to create highly effective highway delineation said to be far more effective than traditional retro-reflective studs. The DfT authorisation, which follows a year-long trial, is likely to have far-reaching implications in both Britain and further afield, opening the door for local authorities and management contractors searching for cost-effective and sustainable
  • Latest Sony sensors for Matrix Vision cameras
    November 13, 2015
    Matrix Vision is to incorporate Sony’s forthcoming global shutter CMOS sensors, the 1/1.8-inch IMX250 and 2/3-inch IMX252, into its mvBlueCOUGAR-XD Dual-GigE and mvBlueFOX3-2 USB3 Vision camera ranges. Initially the 3.2 megapixel IMX252 will be available as the mvBlueCOUGAR-XD104h and mvBlueFOX3-2032, with the 5.1 megapixel IMX250 (mvBlueCOUGAR-XD105a and) mvBlueFOX3-2051 models available early next year.