Skip to main content

Solar cell technology cameras

A new camera range from Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright
February 2, 2012 Read time: 2 mins
The image shows a 40W light bulb, image on the left with a conventional CCD sensor and on the right with the FX4 HDR sensor
A new camera range from 822 Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright scenes, without saturation.

 The FX4 HDR sensor features a patented pixel structure that provides a truly logarithmic output with effective suppression of fixed noise and gives a dynamic range of 120 db. According to Stemmer, this equates to a 1,000 times greater brightness ratio (ratio of the highest brightness value to the lowest brightness value that can be imaged in a scene) compared to conventional linear CCD sensors, which typically have a dynamic range of 60 db.

For more information on companies in this article

Related Content

  • Options abound for road weather sensing
    September 6, 2017
    Meteorological organisations invest millions in super-computers to crunch data for ever-more accurate forecasts but inherent unpredictability means that other methods of alerting drivers and road authorities to fast-changing weather and highway conditions are essential. For years, static weather sensors to measure factors such as surface water, ice or high roadway temperatures have been embedded in highways to provide such data. But that is changing.
  • Low-cost GigE camera
    February 3, 2012
    Prosilica has released the GC780, a new low-cost camera with a GigE Vision-compliant interface. The ultra-compact GC780 (33x46x38mm) features the 0.5in Sony ICX415 progressive scan CCD sensor and runs 64 frames per second at full resolution (782x582).
  • Jai camera for advanced ITS systems
    January 27, 2012
    Jai has introduced two new 2MP industrial-grade CCD cameras featuring full HDTV resolution (1,920x1,080P) at 64fps, making them ideal for advanced traffic imaging and vehicle recognition applications in traffic management and traffic enforcement. The new AM-201CL (monochrome) and AB-201CL (colour) cameras are the second set of cameras from Jai to feature highperformance quad-tap CCD sensors from Kodak. Like the previously introduced 8MP cameras, the new HD cameras utilise the high speed of the quad-tap arch
  • GigE camera
    February 3, 2012
    The new Hitachi GigE camera range takes advantage of GigE Vision, the first standard to allow for fast image transfer using low cost standard cables over very long lengths.