Skip to main content

Solar cell technology cameras

A new camera range from Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright
February 2, 2012 Read time: 2 mins
The image shows a 40W light bulb, image on the left with a conventional CCD sensor and on the right with the FX4 HDR sensor
A new camera range from 822 Stemmer Imaging uses a sensor, based on solar cell technology, to allow imaging from scenes which simultaneously contain both very light and very dark areas. The company says this makes them ideally suited to use in environments with a very high dynamic range, or where there are strong and unpredictable brightness fluctuations. The new FX4 HDR (High Dynamic Range) sensor produces a logarithmic signal output. This enables fine differences in brightness to be imaged even in very bright scenes, without saturation.

 The FX4 HDR sensor features a patented pixel structure that provides a truly logarithmic output with effective suppression of fixed noise and gives a dynamic range of 120 db. According to Stemmer, this equates to a 1,000 times greater brightness ratio (ratio of the highest brightness value to the lowest brightness value that can be imaged in a scene) compared to conventional linear CCD sensors, which typically have a dynamic range of 60 db.

For more information on companies in this article

Related Content

  • Getting C/AVs from pipedream to reality
    October 17, 2019
    The UK government has suggested that driverless cars could be on the roads by 2021. But designers and engineers are grappling with a number of difficult issues, muses Chris Hayhurst of MathWorks Earlier this year, the UK government made the bold statement that by 2021, driverless cars will be on the UK’s roads. But is this an achievable reality? Driverless technology already has its use cases on our roads, with levels of autonomy ranked on a scale. At one end of the spectrum, level 1 is defined by th
  • Leddar technology wins in Toronto
    October 6, 2014
    Following a successful trial, the City of Toronto in Canada has ordered an initial sixty of LeddarTech’s innovative d-tec 3D non-intrusive overhead traffic sensors based on Leddar (Light Emitting Diode Detection and Ranging) technology for its traffic management needs. Leddar says that ease of configuration, speed of installation on existing infrastructure, accurate detection in all environmental conditions and its ability to detect objects of all sizes, including bicycles and motorcycles, set d-tec apa
  • TikTok’s Mr Barricade speaks out
    August 27, 2021
    Civil engineer Vignesh Swaminatham (aka Mr Barricade) shares his thoughts with Adam Hill about TikTok, infrastructure, ITS, quick-build projects, bike lanes, inequality, local politics - and dancing
  • Here’s why WiM is value for money
    January 23, 2025
    Weigh in Motion systems are not new. What is new is their ability to collect more data and – importantly – more accurate data about axle loading and vehicle weight. Despite the obvious benefits, including safer highways and possibility of automated legal weight enforcement, obstacles remain for faster uptake. David Arminas reports on the manufacturers’ perspective…