Point Grey expands Grasshopper family

Point Grey has extended to its Grasshopper3 USB3 Vision product line with the Grasshopper3 GigE Vision PoE camera family. The first two models in the new lineup feature Sony CMOS and CCD global shutter devices. The Grasshopper3 GS3-PGE-23S6 models use colour and monochrome versions of the 24.4 x 30.5mm (1/1.2-inch) Sony IMX174 Exmor global shutter CMOS sensor and offer image resolution of 1920x1200 pixels and frame rates up to 46 FPS. The IMX174 is the first global shutter sensor from Sony and delivers
September 25, 2014 Read time: 2 mins
541 Point Grey has extended to its Grasshopper3 USB3 Vision product line with the Grasshopper3 GigE Vision PoE camera family.

The first two models in the new lineup feature 576 Sony CMOS and CCD global shutter devices.  The Grasshopper3 GS3-PGE-23S6 models use colour and monochrome versions of the 24.4 x 30.5mm (1/1.2-inch) Sony IMX174 Exmor global shutter CMOS sensor and offer image resolution of 1920x1200 pixels and frame rates up to 46 FPS. The IMX174 is the first global shutter sensor from Sony and delivers a wide dynamic range performance of 73dB while maximising sensitivity and low light response with a peak quantum efficiency of 76%.  The sensor’s region of interest functionality can also be used to enable high-definition HD 1080p format.

The Grasshopper3 GS3-PGE-60S6 models use colour and monochrome versions of the 25.4mm (1-inch) Sony ICX694 global shutter CCD sensor and offer image resolution of 2736x2192 pixels and frame rates up to 13 FPS. The high resolution ICX694 device uses Sony’s ExVIEW HAD CCD II technology, which is targeted for improved near infrared response.

Point Grey says the new models allow them to offer more competitive price support to applications that require long cable length, such as intelligent traffic systems.
Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Teledyne e2v releases Emerald 5M image sensor
    November 28, 2018
    Teledyne e2v has launched its Emerald 5M CMOS image sensor which it says provides higher resolution images of objects in motion with no distortion. The solution is expected to be suitable for machine vision, automated optical inspection and factory automation applications. Emerald 5M features a global shutter and MIPI CSI-2 interface which allows it to utilise image signal processors available for mobile applications. According to Teledyne e2v, the sensor comes with digital functionalities such as subsa
    Read More
  • Optic-fibre transport solution
    February 3, 2012
    MultiDyne has introduced the DVI-6000 Single & Dual Link, a long-haul optic-fibre transport solution for high-quality RGB-HV and DVI-D with a DVI-I interface.
    Read More
  • Videology adds camera board to help users see in the dark
    January 11, 2018
    Videology has added another extended SDI camera board to its latest range of cameras designed for traffic monitoring, surveillance and other non-traffic functions. Designated the 24RS2.0.XWEXSDI, it can transmit 1080P HD images up to 300m (1,000ft). The camera board is designed to obtain images beyond the human eye without near-IR LED illumination, which can also be used if required. Colour noise is reduced and colour brightness is enhanced. Sony Starvis’ sensor captures the available photon beyond near-IR
    Read More
  • Teledyne Dalsa showcases 5-Gigabit, GigE vision models
    October 25, 2018
    Teledyne Dalsa’s 5-Gigabit, GigE Vision cameras are intended for imaging applications which require high-speed data transfer. The company says the new cameras can replace existing units built into current vision systems which rely on the existing GigE vision interface standard. The Genie Nano cameras are built around Sony image sensors and are expected to offer resolutions from 3.2Mpixels to 12Mpixels - with more models to follow by the end of the year, the firm says. Also, the cameras feature the new 5G
    Read More

Highlighted Content