IP video storage systems

Vicon Industries is replacing its line of RAID storage devices with iSCSI SAN-RAID models that make use of newer networking and storage technology. Like traditional RAID devices, the new models feature multiple, hot-swappable hard drives which provide secure storage of large quantities of recorded digital video. However, the new models are designed for use in a 'Storage Area Network', meaning that they no longer need to be physically connected to a DVR or NVR. Instead, the SAN-RAID units exist as part of a
July 30, 2012 Read time: 2 mins
547 Vicon Industries is replacing its line of RAID storage devices with iSCSI SAN-RAID models that make use of newer networking and storage technology. Like traditional RAID devices, the new models feature multiple, hot-swappable hard drives which provide secure storage of large quantities of recorded digital video. However, the new models are designed for use in a 'Storage Area Network', meaning that they no longer need to be physically connected to a DVR or NVR. Instead, the SAN-RAID units exist as part of a network and can store video from one or multiple network recording devices regardless of their physical location. Compared to the traditional 'one-RAID-per-NVR' model, Vicon says the SAN-RAID option therefore offers savings both in cost and physical space required by the units.

In addition, the new SAN-RAID devices make use of the iSCSI protocol, allowing them to transmit and receive signals over regular Ethernet cabling (Cat 5 and other options). The iSCSI protocol can transmit signals up to 25 times farther than traditional SCSI connections used by the previous generation
of RAIDs.

Vicon's new SAN-RAID devices are available with eight, 14 or 42 bays and provide varying amounts of usable storage, ranging from 3.3 to 36Tb.

Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Trials show fuel savings with connected vehicle technology
    December 16, 2015
    American and European trials point to fuel and emissions reductions. A trial by University of California-Riverside (UC-Riverside) has shown connected vehicle technology has the potential to reduce fuel consumption (and therefore emissions) by up to 18% compared with an uninformed driver.
    Read More
  • Automating enforcement of environmental zones
    July 27, 2012
    Amsterdam City Council has chosen to move away from manual enforcement of its environmental zone, which is intended to keep highly polluting goods vehicles out of the city centre, and is installing an automated, ANPR-based system. The signs are not much to look at: white with a red circle and the all-important word Milieuzone ('Environmental zone'). But these signs mean that Amsterdam's city centre is strictly off-limits to polluting goods traffic. At the moment compliance is monitored by special wardens wh
    Read More
  • Manchester seeks smart but not selective transport solutions
    January 25, 2018
    Smarter transport relies on better communications both with travellers and between transport providers. Andrew Williams reports. Inrix’s prediction that the cost of traffic congestion will rise by 63% to £21bn per year by 2030 clearly illustrates that, in addition to the ongoing inconvenience and inefficiency, ongoing gridlock is a significant drain on the economy. It is against this backdrop that a Cisco-led consortium has launched CitySpire, a smart transport programme that uses location-based services a
    Read More
  • Aimsun assesses Spain V2X impact
    June 21, 2022
    An Aimsun project with C-Roads Spain to assess the impact of Day 1 V2X services has been completed: Aimsun senior transportation modeller Laura Torres explains some of the results
    Read More

Highlighted Content