Skip to main content

High-speed Gazelle

The Gazelle camera series from Point Grey debuts with 2.2 and 4.1 megapixel monochrome models based on the high sensitivity CMOSIS CMV2000 and CMV4000 global shutter CMOS sensors. With a Camera Link digital interface in Base (2-tap) and Full (8-tap) configurations, the 2.2 megapixel model outputs 2048x1088 resolution images at a maximum rate of 280 FPS, while the 4.1 megapixel model outputs 2048x2048 images at 150 FPS.
January 25, 2012 Read time: 1 min
The Gazelle camera series from Point Grey
The Gazelle camera series from 541 Point Grey debuts with 2.2 and 4.1 megapixel monochrome models based on the high sensitivity CMOSIS CMV2000 and CMV4000 global shutter CMOS sensors. With a Camera Link digital interface in Base (2-tap) and Full (8-tap) configurations, the 2.2 megapixel model outputs 2048x1088 resolution images at a maximum rate of 280 FPS, while the 4.1 megapixel model outputs 2048x2048 images at 150 FPS.

The Gazelle features the same compact housing as Point Grey's popular Grasshopper camera, which measures just 44 x 29 x 58 mm in size. A host of features are included for customising imaging applications, including opto-isolated GPIO for industrial triggering and strobe output, pixel binning and region of interest modes, and user configuration sets for custom default settings.

For more information on companies in this article

Related Content

  • Redvision adds two fixed camera options for Vega
    March 16, 2018
    Manufacturer of rugged CCTV products Redvision has added two pre-built, fixed-camera options to its Vega, rugged housing range. It includes the cable-managed Vega 2052, with a 2MP camera module and Vega 2054, which features a 4MP camera module. Both products are said to offer protection from dirt, moisture and dust ingress. The cable-manged devices come with terminals that aim to provide protection against vandalism. In addition, they can be installed with a pendent or pedestal mount for ceilings, walls
  • Active Ethernet I/O servers compatible with NI LabVIEW 8
    March 12, 2012
    MOXA has announced that its ioLogik E2000 Active Ethernet I/O servers are compatible with NI LabVIEW 8. Active ethernet I/O is a powerful new concept in remote data acquisition where I/O events trigger customised messages that are instantly sent to host computers. Active Ethernet I/O supports traditional Modbus/TCP for maximum compatibility with existing applications.
  • GigE camera
    February 3, 2012
    The new Hitachi GigE camera range takes advantage of GigE Vision, the first standard to allow for fast image transfer using low cost standard cables over very long lengths.
  • Wireless video interface for automated traffic tolling
    July 16, 2014
    Canadian video interface supplier Pleora Technologies has unveiled the world’s first embedded hardware solution for delivering real-time video over a standard IEEE 802.11 wireless link. With Pleora's iPORT NTx-W embedded video interface, designers can quickly and easily integrate high-speed wireless connectivity into imaging systems where video cabling creates complexity, cost, and usability challenges. The device streams uncompressed video with low, consistent latency at sustained throughputs of more t