Skip to main content

Flea3 GigE vision camera family expanded

Point Grey has added new 5- megapixel models to its Flea3 GigE Vision digital camera line. The new Flea3 FL3-GE-50S5 models are based on colour and monochrome versions of the popular Sony ICX655 CCD and are capable of streaming high quality 2448 x 2048 images at 8fps over Gigabit Ethernet. The Flea3 measures just 29 x 29 x30 mm in size and offers a variety of the industry’s most popular Sony CCDs, ranging from VGA to 5 MP. Like all Point Grey GigE cameras the Flea3 complies with version 1.2 of the GigE Visi
April 25, 2012 Read time: 2 mins
541 Point Grey has added new 5- megapixel models to its Flea3 GigE Vision digital camera line. The new Flea3 FL3-GE-50S5 models are based on colour and monochrome versions of the popular Sony ICX655 CCD and are capable of streaming high quality 2448 x 2048 images at 8fps over Gigabit Ethernet. The Flea3 measures just 29 x 29 x30 mm in size and offers a variety of the industry’s most popular 576 Sony CCDs, ranging from VGA to 5 MP. Like all Point Grey GigE cameras the Flea3 complies with version 1.2 of the GigE Vision specification, which allows the camera to work seamlessly with software from Cognex, Mathworks, Matrox, MVTec, and NI, as well as with Point Grey’s own FlyCapture SDK.

“The new 5 MP Flea3 offers an unbeatable combination of small size and high resolution,” says Michael Gibbons, director of product marketing at Point Grey. “The Flea3’s small ice-cube form factor and GigE interface make it an ideal analogue camera replacement, and because it uses a 2/3” global shutter Sony CCD the imaging performance is far superior to that of other 5 MP rolling shutter CMOS-based cameras.”

Related Content

  • Point Grey enhances compatibility
    October 7, 2013
    High performance digital camera manufacturer Point Grey has introduced plug-and-play interoperability between its Flea3 USB3 Vision cameras and NI Vision acquisition software, vision builder for automated inspection (AI) and the LabView vision development module. The USB3 Vision machine vision interface standard is designed to enable seamless integration between USB 3.0 cameras, cables and image processing libraries from different vendors. The standard defines a stream and control protocol, which leverages
  • Matrix Vision interfaces with new CMOS
    October 29, 2014
    Matrix Vision now offers its dual-Gigabit Ethernet, Gigabit Ethernet and USB 3.0 industrial cameras interfaced with the new Sony IMX174 CMOS sensor, which the company says sets standards in dynamic, speed, quantum efficiency and noise. The 1.5-inch sensor has a resolution of 1936 x 1214 pixels and reaches a frame rate of 128fps in the dual-GigE model mvBlueCOUGAR-XD using the burst mode, 52fps in the GigE family mvBlueCOUGAR-X, and 162fps in the USB 3.0 model mvBlueFOX3. Even in situations with difficul
  • IR’s invisible benefit for traffic surveillance and enforcement
    June 30, 2016
    Advances in vision technology are enhancing traffic surveillance and enforcement applications. Variable lighting conditions have long been a stumbling block for vision technology applications in the transport sector. With applications such as ANPR, the read-rate may vary between daylight and night and can be adversely affected by glare and low sun. Madrid, Spain-based Lector Vision had these considerations in mind when designing its Traffic Eye ANPR system, which combines off-the-shelf and custom hardware
  • Allied Vision Technologies expands Manta range
    May 31, 2013
    The Manta series of cameras from Allied Vision Technologies is to be expanded with five new models with high-resolution multi-tap CCD or CMOS sensor and 2.2 up to 9.2 megapixels. The Manta is a flexible, feature-rich GigE Vision camera; the Manta G-282 and Manta G-917 are the first industrial cameras with the new Sony Multi-Tap 2.8 megapixels ICX687 and 9.2 megapixels ICX814. New models also include the high-resolution Manta G-283 with 28 megapixels-sensor as well and the six megapixel Manta G-609. All came