Bluetooth-based traffic detection

Traffax has launched BluFax, based on the globally ubiquitous Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars.
February 6, 2012 Read time: 2 mins
A BluFax freeway installation in Indiana
2262 Traffax has launched BluFax, based on the globally ubiquitous 1835 Bluetooth digital communications protocol, which operates by detecting the MAC addresses of Bluetooth signals from passing cars. By positioning two units at distances of between 1-3km, vehicle travel times are calculated from the relative detection times recorded by the two units. Traffax has licensed the patent-pending technology from the University of the Maryland, where the concept originated under the support of the Maryland State Highway Administration.

Traffax says Bluetooth address matching can be used for a number of applications including measurement of travel times on both freeway and arterial roadways, measurement of origin-destination patterns, and tracking of pedestrian flows. Since it directly measures travel times and space-mean speeds, Traffax claims BluFax is one of the few technologies that offers the ability to accurately measure arterial travel times. The company says that demonstrated detection rates exceeding five per cent of the total traffic stream, yield sample sizes adequate for reliable measurement of arterial flows.

There are two versions of the Traffax BluFax unit. An off-line version is offered that stores its measurements on removable storage media for subsequent processing. This device is typically used for traffic studies, performance measurement and validation of other data collection techniques. It is self-powered and requires no communications.

A real-time version is also offered that continuously transmits the MAC addresses and detection times of passing vehicles to a collection site for continuous processing. The real-time unit is used for such applications as display of travel times on variable message signs, and data inputs to 511 telephone systems.
Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

  • Xerox counts on machine vision for high occupancy enforcement
    October 29, 2014
    Machine vision techniques can provide solutions to some of the traffic planners most enduring problems With a high proportion of cars being occupied by the driver alone, one of the easiest, most environmentally friendly and cheapest methods of reducing congestion is to encourage more people to travel in each vehicle. So to persuade people to share rides, high occupancy lanes were devised to prioritise vehicles with (typically) three of more people on board and in some areas these vehicles are exempt from
    Read More
  • Econolite keeps an open mind
    May 11, 2021
    If we’re going to take advantage of new technologies to improve safety, collaboration at the traffic management cabinet edge is vital, thinks Eric Raamot of Econolite
    Read More
  • Austria’s answer to temporary traffic problems
    December 22, 2015
    ASFINAG has developed a mobile traffic monitoring and guidance system through a pre-commercial procurement project. Drivers have become accustomed to roadside and gantry-mounted traffic guidance and control systems along the major roads and main motorway sections. But there are occasions when intense monitoring is required on a temporary basis along motorway sections without traffic guidance and control systems and on federal and national roads too. Examples include the monitoring of the traffic flow during
    Read More
  • Caltrans trials Xerox’s Passenger Detection System
    October 30, 2015
    Xerox’s Passenger Detection System has been trialled in California and compared with the state’s team of human counters giving some interesting results, as Colin Sowman discovers. Like others adopting high-occupancy and high-occupancy vehicle (HOV) lanes for congestion management, Caltrans has faced challenges with compliance in what has been effectively an ‘honour system’ with drivers trusted to set their tags correctly or comply with the multi-passenger requirement.
    Read More

Highlighted Content